Disc Ceramic Capacitors General Specifications - SL CAPACITORS - CLASS SL These capacitors have wide temperature characteristics but still offer low loss and linear type TCs. They are specially designed to be smaller alternative to standard Class I capacitors of linear temperature coefficient. Typical application is RF tuning and decoupling. HOW TO ORDER 5K K 101 K A B A A Product Code Voltage Capacitance Tolerance Lead Capacitor Finishing Packaging Forming Diameter PERFORMANCE CHARACTERISTICS Low Voltage High Voltage C 100 pF 1MHz/1.0 Vrms / 25C R Measured at 1.0kHz 0.3 Vrms / 25C C > 100 pF 1kHz/0.3 Vrms / 25C R Dissipation C 100 pF ... 0.10% 1MHz 1.0 Vrms 1MHz 1.0 Vrms R Factor (%) C > 100 pF ... 1.0% 100kHz 0.3 Vrms 100kHz 0.3 Vrms R C > 100 pF ... 0.10% 1kHz 0.3 Vrms 1kHz 0.3 Vrms R C 10 pF 0.25 pF, 0.5 pF C 10 pF 0.25 pF, 0.5 pF R R Tolerance C > 10 pF 5%, 10%, 20% C > 10 pF 5%, 10%, 20% R R Temperature +350 ppm... -1500 ppm (P350... N1500) Coefficient Insulation V 10 G 500V 10 G R Resistance (IR) Dielectric Strength NOTE: Charging V = 100V Vt = 250V (DC) R 1.5 x V + 500 (DC) R current limited V = 500V Vt = 1250V (DC) R to 50 mA dV/dt Test up to 1.5 kV/sec up to 10 kV/sec Operating Temperature -30... +85C -30... +125C Range (C) Climatic 30 / 85 / 21 Phenolic Coated 30 / 85 / 56 Epoxy Coated Category Note: Damp Heat Steady State: 90... 95% R.H. 40C / 21 days. No voltage to be applied. 9Disc Ceramic Capacitors Dimension Table - SL - Low Dissipation Class SL CAPACITANCE VS. DISC DIAMETER millimeters (inches) Type Phenolic Coating Epoxy Coating Digits 1, 2, 3 5KK 5KQ 5KR 5KS 5KT of P.N. Rated 100 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC Voltage (VR) 50 VAC 100 VAC 100 VAC 150 VAC 150 VAC C (pF) R 1.0 1.2 1.5 2.2 2.7 3.3 3.9 4.7 5.6 5.0 (0.197) 8.2 10 12 15 18 22 27 5.0 (0.197) 33 39 6.0 (0.236) 47 6.0 (0.236) 56 68 6.0 (0.236) 82 100 6.0 (0.236) 120 8.0 (0.315) 150 8.0 (0.315) 180 8.0 (0.315) 220 270 330 9.0 (0.354) 9.0 (0.354) 390 9.0 (0.354) 470 7.0 (0.276) 560 6.0 (0.236) 10.0 (0.394) 10.0 (0.394) 10.0 (0.394) 680 7.0 (0.276) 820 8.0 (0.315) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 1000 8.0 (0.315) Diameter () = 9th Part Number Digit 10