Disc Ceramic Capacitors
General Specifications - Class III Semi Conducting
DIELECTRIC - CLASS III
A thin dielectric layer is grown on a disc of conductive
ceramic. Very large capacitances can be obtained due to
reduced thickness of this barrier layer and its inherently
high dielectric constant. Due to its small dimensions, they
are a less expensive replacement of multilayer ceramic or
polyester capacitors. An equivalent circuit is shown below:
Meets IEC 324 (1970).
HOW TO ORDER
5Z H 104 Z A C A A
Product Code Voltage Capacitance Tolerance Lead Capacitor Finishing Packaging
Forming Diameter
PERFORMANCE CHARACTERISTICS CLASS III
Measured at 1.0 kHz / 0.1 Vrms / 25C
Dissipation C 22 nF Y5V, Y5U 7.5%
R
Factor (%) C > 22 nF Y5V, Y5P 5.0%
R
Y5P 20% / -20 +50%
Tolerance Y5U 20% / -20 +50%
Y5V -20% +50% / -20 +80%
Y5P 12 M
Insulation
4.7 nF...100 nF 10 M
Resistance
Y5U
200 nF 1 M
(IR)
Y5V 100 M
Between
Dielectric Strength
Vt = 1.25 V
R
leads
NOTE: Charging
current limited
Body V = 25V Vt = 100V (DC)
R
to 50 mA
insulation V = 50V Vt = 150V (DC)
R
Operating
Temperature -30... +85C
Range (C)
Climate
30 / 85 / 21
Category
15Disc Ceramic Capacitors
General Specifications - Class III Semi Conducting
TEMPERATURE COEFFICIENT TYPICAL CURVES
PHENOLIC COATED CAPACITANCE VS. DISC DIAMETER millimeters (inches)
C/C (max.) Range C/C (max.) Range C/C (max.) Range
Class III
12% -30... +85C +30 -65% -30... +85C +30 -65% -30... +85C
Temp.
Y5P Y5U Y5V
Coefficient
Digits 1,2,3
5WF 5WH 5YF 5YH 5ZH
of P.N.
Rated
25 VDC 50 VDC 25 VDC 50 VDC 50 VDC
Voltage (V )
R
C (pF)
R
4,700 5.0 (0.197) 5.0 (0.197)
5.0 (0.197)
10,000 6.0 (0.236) 6.0 (0.236) 5.0 (0.197)
22,000 7.0 (0.276) 8.0 (0.315) 6.0 (0.236) 5.0 (0.197)
33,000 8.0 (0.315) 6.0 (0.236) 7.0 (0.276)
9.0 (0.354)
47,000
9.0 (0.354) 8.0 (0.315)
50,000 7.0 (0.276)
68,000 6.0 (0.236)
11.0 (0.433) 11.0 (0.433) 9.0 (0.354)
100,000 8.0 (0.315)
200,000 10.0 (0.394)
Note: Damp Heat Steady State: 90... 95% R.H. 40C / 21 days. No voltage to be applied.
16