Microwave MLCs AQ Series These porcelain and ceramic dielectric multilayer capacitor (MLC) chips are best suited for RF/ Microwave applications typically ranging from 10 MHz to 4.2 GHz. Characteristic is a fine grained, high density, high purity dielectric material imper- vious to moisture with heavy internal palladium electrodes. These characteristics lend well to applications requiring: 1) high current carrying capabilities 2) high quality factors 3) very low equivalent series resistance 4) very high series resonance 5) excellent stability under stresses of changing volt- age, frequency, time and temperature. MECHANICAL DIMENSIONS: inches (millimeters) Case Length (L) Width (W) Thickness (T) Band Width (bw) L W .055.015 .055.015 .020/.057 .010 + .010 -.005 AQ11 (1.40.381) (1.40.381) (.508/1.45) (.254 +.254 -.127) T .055 + .015 - .010 .055.015 .020/.057 .010 + .010 -.005 AQ12 (1.40+ .381 - .254) (1.40.381) (.508/1.45) (.254 +.254 -.127) .110.020 .110.020 .030/.102 .015.010 bw AQ13 (2.79.508) (2.79.508) (.762/2.59) (.381.254) .110 + .020 - .010 .110.010 .030/.102 .015.010 AQ14 (2.79 +.889 -.254) (2.79.508) (.762/2.59) (.381.254) HOW TO ORDER 11 E M 100 J A 1 ME AQ Case Capacitance Failure Rate Packaging* EIA Capacitance Code in pF. Size Code Code (See Chart) A = Not First two digits = significant 3A = 13 Reel Unmarked AVX Style Voltage Applicable figures or R for decimal ME = 7 Reel Marked AQ11, AQ12, Code place. RE = 13 Reel Marked AQ13, AQ14 5 = 50V WE = Waffle Pack Marked Third digit = number of zeros 1 = 100V BE = Bulk Marked or after R significant figures. E = 150V 2 = 200V Termination Capacitance 9 = 300V Style Code Tolerance 7 = 500V 7 = Ag/Ni/Au (AQ11/13 only) Code Temperature J = Nickel Barrier Sn/Pb B = .1 pF Coefficient Code (60/40) - (AQ12/14 only) C = .25 pF M = +9020ppm/C (AQ11/12/13/14) T = 100% Tin (AQ12/14 only) D = .5 pF A = 030ppm/C (AQ11/12/13/14) F = 1% C = 15% (J Termination only) (AQ12/14) G = 2% J = 5% K = 10% M = 20% N = 30% PACKAGING Not RoHS Compliant Standard Packaging = Waffle Pack (maximum quantity is 80) TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 LEAD-FREE COMPATIBLE COMPONENT (equivalent to IEC 286 part 3). For RoHS compliant products, Sizes SQCA through SQCB, CDR11/12 through 13/14. please select correct termination style. 8mm carrier 7 reel: 0.040 thickness = 2000 pcs 0.075 thickness = 2000 pcs 8 13 reel: 0.075 thickness = 10,000 pcs 092616 205 A 101JMicrowave MLCs AQ Series ELECTRICAL SPECIFICATIONS AQ11, AQ12, AQ13, AQ14 M & A C Temperature Coefficient (TCC) (M) +90 20 PPM/C ( -55C to +125C) 15% (-55C to 125C) (M) +90 30 PPM/C ( +125C to +175C) (A) 0 30 PPM/C Capacitance Range (M) 0.1 pF to 1000 pF 0.001F to 0.1F (A) 0.1 pF to 5100 pF Operating Temperature 0.1 pF to 330 pF: from -55C to +175C -55C to +125C 360 pF to 5100 pF: from -55C to +125C Quality Factor (Q) M Dielectric A & B Case Greater than 10,000 at 1 MHz 2.5% 1kHz A Dielectric B Case Greater than 10,000 at 1 MHz 0.1 - 200 pF Greater than 2,000 at 1 MHz 220 - 1000 pF Greater than 2,000 at 1 KHz 1100 - 5100 pF A Dielectric A Case Greater than 10,000 at 1 MHz 0.1 - 100 pF Greater than 2,000 at 1 MHz 110 - 1000 pF 4 Insulation Resistance (IR) 0.1 pF to 470 pF 10 Megohms min. 25C at rated WVDC 6 3 10 Megohms min. 25C at rated WVDC 10 Megohms min. 125C at rated WVDC 5 10 Megohms min. 125C at rated WVDC 510 pF to 5100 pF 5 10 Megohms min. 25C at rated WVDC 4 10 Megohms min. 125C at rated WVDC Working Voltage (WVDC) See Capacitance Values table See Capacitance Values table Dielectric Withstanding Voltage (DWV) 250% of rated WVDC for 5 secs 250% of rated WVDC for 5 secs (for 500V rated 150% of rated voltage) Aging Effects None <3% per decade hour Piezoelectric Effects None None Capacitance Drift (0.02% or 0.02 pF), whichever is greater Not Applicable ENVIRONMENTAL CHARACTERISTICS AVX SQLB will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123 Themal Shock Mil-STD-202, Method 107, Condition A Moisture Resistance Mil-STD-202, Method 106 Low Voltage Humidity Mil-STD-202, Method 103, condition A, with 1.5 VDC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours Life Test Mil-STD-202, Method 108, for 2000 hours at 125C Shock Mil-STD-202, Method 213, Condition J Vibration Mil-STD-202, Method 204, Condition B Immersion Mil-STD-202, Method 104, Condition B Salt Spray Mil-STD-202, Method 101, Condition B Solderability Mil-STD-202, Method 208 Terminal Strength Mil-STD-202, Method 211 Temperature Cycling Mil-STD-202, Method 102, Condition C Barometric Pressure Mil-STD-202, Method 105, Condition B Resistance to Solder Heat Mil-STD-202, Method 210, Condition C 8 092616 206