001-0023 Laird Connectivity

A The Laird Connectivity FlexNotch is the only adhesive-backed, flexible notch antenna that can be easily custom-trimmed for maximum range within a specific enclosure. Paired with the antenna design expertise offered by Laird, FlexNotch provides a simple, repeatable process for optimizing antenna tuning to deliver maximum range for your application. Can be installed on flat or curved surfaces Flexible, ultra-low profile Simple custom options with trimming length RoHS-compliant Quick and easy installation Adhesive holds to surface during humidity exposure and hot/cold cycles Operating Frequency (MHz) 2400 - 2480 Peak Gain (dBi) 2.0 Average Gain (dBi) > -1.6 VSWR < 2.5:1 Nominal Impedance (Ohms) 50 Polarization Linear Azimuth Beam Width 32.0 x 21.08 (1.26 x 0.83) Dimensions mm (in.) Weight g (oz.) 0.85 (0.03) Antenna Color Clear yellow Adhesive 3M 100 MP MHF1 (U.FL): 2.5 (0.098) Connector Height (max) mm (in.) MHF4L: 1.4 (0.055) Operating Temperature C (F) -40C to +85C (-40F to +185F) RoHS Compliant Material Substance Compliance 001-0015 2.4 GHz FlexNotch antenna with U.FL cable, 100 mm 001-0023 2.4 GHz FlexNotch antenna with MHF4L cable, 100 mm ANT-DS-FLEXNOTCH 0919 Figure 1: FlexNotch mechanical drawing Antenna measurements such as VSWR were measured with an Agilent E5071C Vector Network Analyzer. Radiation patterns were measured with an Agilent 5181A Signal Generator and Agilent E4445A Spectrum Analyzer in a three-meter anechoic chamber. Flat surface measurements were done with the antenna centered on a 1.5-millimeter thick plate of Polycarbonate. ANT-DS-FLEXNOTCH 0919