A Fiberglass base station antennas feature industry leading design components that perform in extreme conditions. The FG4505W incorporates a collinear design that is enclosed in high density fiberglass, which is covered with a protective ultraviolet inhibiting coating. The radiating elements are carefully phased to provide maximum gain in the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line, resulting in a cold sleeve that allows for greater freedom in mounting. The antennas high quality and well-focused beam provides the best efficiency with highest gain. High gain 7 dBi Custom UV protection coating Every antenna is tested on a network Durable gold anodized sleeve and analyzer before shipping to ensure the best cap with N-female connector performance ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 450 470 VSWR 2.0:1 Peak Gain (dBi) 7 Nominal Impedance (Ohms) 50 Max Power - Ambient 25C (W) 100 Polarization Vertical Elevation Beamwidth at Half-Power (Deg) 34 Azimuth Beamwidth at Half-Power (Deg) 360 Pattern Omnidirectional MECHANICAL SPECIFICATIONS Dimensions diameter x height cm (in.) 3.33 x 1903.50 (1.31 x 765) Weight kg (lbs.) 1.06 (2.34) Radome Material UV Treated Fiberglass Color White radome/Gold sleeve ENVIRONMENTAL SPECIFICATIONS Operating Environment (Indoor or Outdoor) Outdoor Operating and Storage Temperature C (F) -35 to 80 (-31 to 176) Wind Operational km/hr (mph) 200 (125) PART NUMBER CABLE LENGTH CONNECTOR MOUNTING FG4505W N/A N-Female FM2 Optional ANT-DS-FG4505W 1218 Azimuthal Pattern (Y, Z, or E-plane) Elevation Pattern (Y, Z, or H-plane) Americas: +1.847 839.6925 IAS-AmericasSales lairdtech.com Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and limitations Europe: +44.1628.858941 Laird will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited warranty is in force IAS-EUSales lairdtech.com for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may vary but is not to exceed five (5) Asia: IAS-AsiaSales lairdtech.com years from the original date of the end product purchase. Middle East and Africa: +44.1628.858941 Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of IAS-MEAUSales lairdtech.com Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and