POE-xxi Power-Over-Ethernet Innovative Technology for a Connected World POWER-OVER-ETHERNET Power Supply / Inserter The POE-xxi is an advanced power supply / power inserter. The power supply is autoranging on the input and has a regulated voltage output. It has overload and short circuit protection in addition to Ethernet surge suppression built-in. The POE-xxi is not a proprietary unit. It will function with any equipment that is compliant with the IEEE 802.3af POE standards. For all i models, the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-). For the iR models, the power is supplied on Ethernet pins 4/5 (V-) and 7/8 (V+). The POE-xxi comes complete with a standard North American 115 VAC power cord. International cords are available upon request. A Current Indicator (-CI) model is available. The LED will be AMBER until >35 mA current flows to the end device which will turn the LED to GREEN. This is a good way to remotely monitor the connection between the Power-Over-Ethernet (POE) and the end device, and to indicate that the end device is turned on. To order this model, add a CI suffix to the standard part number. Using POE to power remote devices has several advantages including The power supply can be centrally located where it can be attached to an uninterruptible power supply. The user has the ability to easily power on reset the attached equipment from a remote location. There is no need to run additional power cabling to the device as power can be supplied over the CAT5 ethernet cable. FEATURES AND BENEFITS: APPLICATIONS: Carrier class power over ethernet system Remote routers, access points and bridges Auto ranging power supply/ inserter Remote networking equipment Built-in Ethernet surge protection to prevent SOHO equipment equipment damage IP camera systems Overload and short circuit protection 400 MHz to 10 GHz systems Minimum cross-talk and insertion loss IP phone systems Advanced switching technology runs cool WiMAX Powers clients which accept power on unused Ethernet pins 4, 5, 7, 8 FCC and CE approved Current indicator (CI) option available global solutions: local support TM Americas: +1.847 839.6907 IAS-AmericasEastSales lairdtech.com Europe: +1.32.80.7866.12 IAS-EUSales lairdtech.com Asia: +1.65.6.243.8022 IAS-AsiaSales lairdtech.com www.lairdtech.comPOE-xxi Power-Over-Ethernet Innovative Technology for a Connected World POE-xxi POWER SUPPLY/INJECTOR COMPLIANCE: Input Voltage 90 264 VAC 47 63 Hz IEEE 802.3af POE Standard Mode B Input Current 0.3 A 120 VAC EMI EMI EN55022 ( CISPR22) class B 0.2 A 230 VAC Meets CE Inrush Current <15 A peak 120 VAC EMS EN61000-4-2,3,4,5,6,8,11 <30 A peak 230 VAC Efficiency 70% Min. SYSTEM ORDERING: POE-48i Output Voltage POE-48i 48 VDC 0.50 A 48 VDC .50 A POE Power Supply / Inserter POE-24i 24 VDC 0.8 A POE-24iR 24 VDC 0.8 A POE-24i POE-18i 18 VDC 0.9 A 24 VDC .8 A POE Power Supply / Inserter POE-12i 12 VDC 1.3 A Output Ripple 1% Max POE-18i Switching Frequency 200 KHz Typ 18 VDC .9 A POE Power Supply / Inserter Line Regulation +/- 0.5% POE-12i Load Regulation +/- 1% 12 VDC 1.3 A POE Power Supply / Inserter Operating Temperature -10 to +60C POE-24iR Reverse Polarity Storage Temperature -20 to +85C 24 VDC .8 A POE Power Supply / Inserter Operating Humidity 5% to 90% non condensing (Pins 4/5 V-, Pins 7/8 V+) Size (L x W x H) 3.25 x 3 x 1.5 in (83 x 76 x 38 mm) * All include AC Power Cord Weight 5.2 oz (147 gm) NOTES: AC Connector IEC-320 C6 All shipments F.O.B. Schaumburg, IL 60173 (Supercom SC-14) Data IN Conn. RJ45 Shielded Socket Data/POE OUT Conn. RJ45 Shielded Socket LED (Amber) Green Surge Protection Common Mode Clamping Voltage 11 V Data, 775 V Power Max Surge Discharge Current 1200 A (8/20 uS) Power Peak Pulse Current 36 A (10/1000 uS) Data Shunt Capacitance <5 pf Data Response Time <1 nS Power Supply Inserter AC Power IN (90-264 VAC) Power Supply Inserter Data IN Power Supply Inserter Data/POE OUT ANT-DS-POE-xxi 0612 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. 802.3af POE Power Up Sequence Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. 1. Detection Look for 802.3af compliant signature Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2012 Laird Technologies, Inc. All Rights Reserved. Laird, 2. Startup Ramp power safely Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights. 3. Operation Continuously monitor for short circuit or overload