POE-HP-50i-EU

POE-HP-xxi Power-Over-Ethernet Power Supply/Inserter CARRIER CLASS POWER OVER ETHERNET SYSTEM The POE-HP-xxi is an advanced 802.3af compliant power supply/inserter. The power supply is autoranging on the input and has a regulated voltage output and it has overload and short circuit protection. The POE-HP-xxi is not a proprietary unit. It will function with any equipment which is compliant with the IEEE 802.3af POE standards. The POE-HP-xxi does not include the intelligent detection algorithms detailed in the 802.3af spec which means that the POE-HP-xxi will power up any device connected to it. The power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-). The POE-HP-xxi comes complete with a standard North American 115 VAC power cord. International cords are available upon request. Using power over Ethernet to power remote devices has several advantages including The power supply can be centrally located where it can be attached to an uninterruptible power supply. The user has the ability to easily power on and reset the attached equipment from a remote location. There is no need to run additional power cabling to the device as power can be supplied over the CAT5 ethernet cable. The power supply can power a remote device up to 300 feet away, limited only by the Ethernet standard. FEATURES MARKETS High power (50W) output Remote routers, access points, and bridges Auto ranging power supply / inserter Remote networking equipment Overload and short circuit protection Remote camera systems Minimum cross talk and insertion loss 400 MHz to 10 GHz systems Advanced switching technology runs cool SOHO equipment Complies with IEEE 802.3af POE standard IP phone systems WiMAX Americas: +1.847 839.6907 IAS-AmericasEastSales lairdtech.com Europe: +44.1628.858941 IAS-EUSales lairdtech.com Asia: +86.21.5855.0827.127 IAS-AsiaSales lairdtech.com www.lairdtech.comPOE-HP-xxi Power-Over-Ethernet Power Supply/Inserter SPECIFICATIONS Input Voltage: 90 264 VAC 47 63 Hz Input Current Full Load: 0.6 A 120 VAC 0.35 A 230 VAC Efficiency: 80% Min. Output Voltage: POE-HP-50i 50 VDC 1A Power Supply Inserter AC Power IN POE-HP-24i 24 VDC 2A (90-264VAC) 120V/230 Minimum Load: 0.1 A Min Output Ripple: 1% Max Line Regulation: 1% Load Regulation: 2% Operating Temperature: -15 to +60C Storage Temperature: -40 to +85C Operating Humidity: 5% to 90% non condensing Size (L x W x H): 4.88 x 2.88 x 1.47 in (124 x 74 x 38 mm) Weight: 8 oz (227 gm) AC Connector: IEC 320 EN 60320 C13 (F) Data IN Conn.: RJ45 Shielded Socket Data/POE OUT Conn.: RJ45 Shielded Socket Power Supply Inserter Power Supply Inserter LED: (amber) Green Data IN Data/POE OUT COMPLIANCE IEEE 802.3af POE Standard Mode B EMI EN55022 ( CISPR22) class B Meets CE EMS EN61000-4-2,3,4,5,6,8,11 802.3AF POE POWER UP SEQUENCE 1. Detection Look for 802.3af compliant signature 2. Startup Ramp power safely 3. Operation Continuously monitor for short circuit or overload SYSTEM ORDERING INFORMATION POE-HP-50i 50 VDC 1 A POE Power Supply / Inserter (Includes AC Power Cord) POE-HP-24i 24 VDC 2 A POE Power Supply / Inserter (Includes AC Power Cord) NOTES All shipments F.O.B. Schaumburg, IL 60173 ANT-DS-POE-HP-XXi 0915 Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trade marks or registered trade marks of Laird Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.