Product Information Page 1 of 4
LFLEX 150 QUATTRO Valid: 04.04.2011
Product Description
Broad application range due to multiple approvals
Application range
Plant engineering and construction Industrial machinery Air conditioning installations
machine tools
Mainly in dry, damp and wet interiors (including water-oil mixtures), but not for outdoor use
For fixed installation under medium mechanical load conditions as well as occasional flexing at free,
non-continuously recurring movement without tensile load or compulsory guidance
Note: Single conductor or multi-conductor Type AWM (Appliance Wiring Material) shall be permitted for industrial
machinery (US) when part of a listed assembly suitable for the intended use only. NFPA 79 Edition 2007
12.2.7.3 (Electrical Standard for Industrial Machinery)
Benefits
Broad application range due to multiple approvals
Design
Fine strands of bare copper wires
PVC core insulation
PVC outer sheath, increased oil resistance grey (RAL 7001)
Approvals (Norm references)
Multi standard cables have conductor strands with nominal sizes in mm or AWG/kcmil nominal sizes. The
master size is mentioned in the table below, the equivalent size of the other system can be found in the
catalogue appendix table T16. For this related secondary size the conductor cross-section mostly works out
greater than the specified nominal value.
Product features
Flame retardant according to IEC 60332-1-2 and UL 1581 1061 Cable Flame TestProduct Information Page 2 of 4
LFLEX 150 QUATTRO Valid: 04.04.2011
Increased oil resistance
Technical Data
Core identification code Rated voltage
Black with white numbers acc. to VDE 0293 HAR U0/U: 300/500 V
Approvals UL/CSA: 600 V
H05VV5-F (HD 21.13 S1) Test voltage
UL AWM Style 21098 or 2587 CSA AWM I A/B II 3000 V
A/B Protective conductor
Specific insulation resistance G = with protective conductor GN/YE
> 20 GOhm x cm X = without protective conductor
Conductor stranding Range of temperature
Fine wire in accordance to VDE 0295 Class 5 / IEC Occasional flexing: HAR: -5C up to +70C UL/CSA: -5C
60228 Class 5 up to +90 C
Minimum bending radius Fixed installation: HAR: -40C up to +70C UL/CSA: -40C
Occasional flexing: 12.5 x cable diameter up to +90C
Fixed installation: 4 x cable diameter
Article List
Number
Part Outer Copper Weight
of cores and mm per
number diameter in mm index kg/km kg/km
conductor
LFLEX 150 QUATTRO
0015002 2 X 0,5 5,9 9.6 47
0015003 3 G 0,5 6,2 14.4 62.4
0015004 4 G 0,5 6,8 19.2 68.2
0015005 5 G 0,5 7,4 24.0 87.1
0015007 7 G 0,5 9.0 33.6 118.7
0015012 12 G 0,5 11,1 58.0 198
0015018 18 G 0,5 14,2 86.4 328
0015025 25 G 0,5 16.0 120.0 380.4
0015034 34 G 0,5 18,1 164.0 509
0015041 41 G 0,5 19,7 197.0 595
0015102 2 X 0,75 6,3 14.4 61
0015103 3 G 0,75 6,7 21.6 75.6
0015104 4 G 0,75 7,2 28.8 83.9