PRODUCT INFORMATION LFLEX CONTROL TM LFLEX Control Cable PVC 0.6/1kV UL TC-ER WTTC AWM1000V WET OIL RES I+II CSA AWM LFLEX CONTROL TM: UL MTW TC-ER CIC WTTC AWM 600V OIL RES I+II WET, CSA AWM I/II A/B FT4, Power and control cable 0.6/1 kV, PVC, Tray Exposed Run, Wind Turbine Info Torsion resistant for drip loops Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial machinery (UL) SUN. RES. approval in preparation Torsion-resistant Oil-resistant Mechanical resistance Flame-retardant Cold-resistant Benefits Many certifications/ use types Cost-saving, fast installation omitting protection systems Last Update (16.10.2017) 1 / 4 2017 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02 03.16 PRODUCT INFORMATION LFLEX CONTROL TM Application range Industrial machinery plant engineering Compliant with Tool machines: (UL) MTW Unprotected 600V operation on cable tray in the USA, incl. 6 ft. Exposed Run laying sections USA Wind Turbine Tray Cable (WTTC) Product features Flame-retardant according to CSA FT4 UL Vertical-Tray Flame Test Oil-resistant according to UL OIL RES I & II Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG) Technically resistant to sunlight and ozone Norm references / Approvals USA: (UL) TC E171371 , -ER > 2 conductors, (UL) MTW E155920 , (UL) WTTC E323700 , (UL) THHN/THWN (> 1.5 mm/16 AWG) E172162 , UL AWM Style 20886 E100338 From June 2018: Sunlight Resistant (Sun. Res.), Direct Burial (Dir. Bur.), Submersible Pump Cable (> 1.5 mm/16 AWG, and < 8 conductors), (UL) PLTC (< 6 mm/10 AWG) E216027 , (UL) ITC (< 6 mm/10 AWG) E196134 , (UL) DP-1 E233406 UL OIL RES I/ II, 75C WET, 90C DRY, NFPA 79 2012 + 2015 Edition CAN: c(UL) CIC/ TC 600V FT4 E171371 , CSA AWM I/II A/B FT1 Product Make-up Fine-wire strand made of bare copper wires Insulation: PVC with nylon sheath (PA skin) Outer jacket: Specially formulated thermoplastic polymer Color of the outer jacket: Gray Technical Data Classification: ETIM 5.0 Class-ID: EC000104 ETIM 5.0 Class-Description: Control cable Core identification code: Black with white numbers Conductor stranding: Fine-wire, bare copper strand Torsion movement in WTG: TW-0 & TW-2, refer to Appendix T0 Minimum bending radius: Static/Occ. moved: 5/15xOD* Nominal voltage: UL/CSA: 600 V (TC, MTW, CIC), WTTC 1000 V UL AWM: 600 V CSA AWM: 1000 V IEC U0/U: 600/1000 V Test voltage: 2000 V Protective conductor: G = with GN-YE protective conductor X = without protective conductor Temperature range: -40C (static)/ -25C (occ. moved) to +90C (AWM: +105C) Last Update (16.10.2017) 2 / 4 2017 Lapp Group - Technical changes reserved Product Management www.lappkabel.de You can find the current technical data in the corresponding data sheet. PN 0456 / 02 03.16