73220852 Lapp Kabel

U.I. Lapp PRODUCT INFORMATION GmbH LFLEX SPIRAL 540 P with angular, isolated ground 29.11.2013 plug Robust spiral cable with high restoring forces and earthing-type plug Extension lengths of up to 3.5 times the unextended spiral length, high recoiling forces Safety colour: yellow Suitable for outdoor use Good chemical resistance Cold-resistant Mechanical resistance Oil-resistant Info Robust High restoring forces Application range Harsh conditions Mechanical engineering Construction industry Medical equipment In damp interiors or outdoors Design Cable: LFLEX SPIRAL 540 P based on LFLEX 540 P Strands of tinned-copper wires Core insulation: TPE Outer sheath made of special polyurethane Length of straight ends: 1st end = 200 mm with moulded angular earthing-type plug, 2nd end = 600 mm with 30 mm stripping Other solid lengths, end lengths and end forms available on request 2-pin, angular plug with twin earthed contact system, extruded Norm references / Approvals Plug: DIN VDE 620-1/standard sheet DIN 49441 R2 The VDE marking approval (VDE type certification) refers to the connector Product features Good resistance of the outer sheath to cutting and abrasion High resistance to oil, low temperatures, microbes and hydrolysis Special, flame-retardant polyurethane sheath compound 16-A connector with protection rating IP 20 Product Management Document: LAPP PRO47EN.pdf 1 / 3 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.U.I. Lapp PRODUCT INFORMATION GmbH LFLEX SPIRAL 540 P with angular, isolated ground 29.11.2013 plug Remark Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon request. Copper price basis: EUR 150/100kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related surcharges. 1 piece in each polyester bag Photographs are not to scale and do not represent detailed images of the respective products. Versions without the mandatory LAPP designation, but with other solid lengths, end lengths and end forms (not necessarily VDE-registered) available on request Please observe the safety information as per DIN VDE 0620-1, Plugs and socket-outlets for household and similar purposes - Part 1: General requirements, appendix E: Installation only by persons with the relevant electrotechnical expertise and experience Technical Data Core identification code: HD 308/VDE 0293-308: 3-core with protective conductor Specific insulation resistance: > 20 GOhm x cm Conductor stranding: Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5 Nominal voltage: U0: 250 V AC Test voltage: 2000 V Protective conductor: G = with GN-YE protective conductor Temperature range: Flexible use: -30C to +50C Product Management Document: LAPP PRO47EN.pdf 2 / 3 PN 0486/0 03. 0 2012 Lapp Group - Technical changes reserved Photographs are not to scale and do not represent detailed images of the respective products.