LEDIL FFORM OPTICS STRADA-A-XP LENSES FOR CREE XP-E LEDs - Specially designed for Cree XP-E series of LEDs. - New extremely wide street light design, vertically wider version coming soon. - With the result of an extremely creative design lens itself tilts automatically light 4 degrees. - Special care taken to make a uniform white or warm white illumination. Lenses work well with other colors, too. - Lens material optical grade PMMA. Allows use of high current and temperature conditions - Best available optical efficiency, approximately 94%. - Fastening to heat sink with or without PU foam adhesive tape of automotive grade, please select which suits the best for your needs. LENS TYPES NAME ORDERING CODE FWHM Angle Strada-A-XP C10818 Strada-A-XP check measurement data below Strada-A-XP-TAPE CA10823 Strada-A-XP-tape Ledil Oy PRELIMINARY - Subject to change without prior notice Ledil Oy www.ledil.com Tehdaskatu 13 email: ledil ledil.com FIN-24100 SALO, Finland FAX: +358-2-733 8001 2009-03-26 LEDIL FFORM OPTICS MEASUREMENT DATA Relative Intensity of Strada-A-XP 100% 75% 50% 25% 0% 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 Angle C10818 Strada (horizontal) C10818 Strada (vertical) Example configuration (not optimized) Strada-A-XP Pole distance: 15m / and single Height above the street: 6m Position of the lamp from the side of the road: 2.2m Tilt angle of the lamp: 10 100x Cree XP s per lamp 55lm 0.8W (3.2V/250mA) Lenght: 0.7m Width: 0.3m Rows: 5 LED s per row: 20 Ledil Oy PRELIMINARY - Subject to change without prior notice Ledil Oy www.ledil.com Tehdaskatu 13 email: ledil ledil.com FIN-24100 SALO, Finland FAX: +358-2-733 8001 2009-03-26