Thank you for purchasing this quality LED Magnifier lamp. Please read these instructions carefully before using your lamp. TECHNICAL SPECIFICATIONS DESCRIPTION Long Reach LED Magnifier Lamp MANUFACTURER REF.s LC8060LED VOLTAGES AVAILABLE 220v & 240v, 50Hz MAGNIFIER 125mm (5 ) diameter lens - Removable MAGNIFICATION 3 dioptre lens / 1.75x magnification SUN PROTECTOR CAP Inbuilt Sun Cap HANDLE Inbuilt Handle LED LIGHT SPECIFICATION 56PCS SMD LED, 9W ARM EXTENSION 125cm (50 ) maximum CABLE LENGTH 1.6m TABLE CLAMP Table Clamp included - clamping capacity upto 65mm HOW TO USE 1. Securely fasten the table clamp included to a solid horizontal surface with thicknesses upto 65mm. Ideal for household tables, study desks and work benches 2. Insert the stem of the lamp into the clamp hole 3. Insert the 220v or 240v plug into a conveniently located electrical socket 4. Switch the lamp on by using the on/off switch located on top of the head. The lamp is now ready to use. 5. Adjust your lamp head position using the handle to suit your need and tighten the locking nut as required REMOVING THE LENS You may wish to remove the lens for cleaning purposes or to replace with a 5 dioptre / 2.25x magnification lens LC8060/L (not included - but available as an accessory www.light-craft.co.uk) 1. Please switch the lamp off and remove the plug form the mains socket 2. Turn the plastic lens retainer anti-clockwise and carefully remove the lens 3. Replace lens and turn the plastic lens retainer clockwise to fix secuerly into position IMPORTANT - SAFETY INSTRUCTIONS WARNING: When using electrical products, important safety precautions must be adhered to in order to reduce the risk of fire, electric shock and personal injury. PLEASE READ THE FOLLOWING CAREFULLY: 1. Indoor use only: a. Room temperature from -5 to +40 degrees centigrade b. Humidity: Less than or equal to 95% 2. Do not expose the lamp to: a. High tempertaures b. Water, steam or damp conditions c. Corrosive, flammable liquids, or gaseous / explosive atmospheres 3. Do not abuse the cord. Never carry the lamp by the cord or pull the cord to disconnect the lamp. Keep the cord away from heat, oil or sharp objects 4. Disconnect your lamp when not in use and when changing the lens 5. Never attempt to disassemble or repair the lamp, unless you are a qualified electrician CE Declaration of Conformity We declare that this product complies with: EN60598-1:1997+A1+A12+A13 EN60598-2-4:1997 and also conforms with the Low Voltage Directive 73/23/EEC as last amended by EEC Directive 93/68/EEC Shesto Limited 3 Century Court Tolpits Lane Watford, WD18 9RS United Kingdom RoHS Compliant Tel: +44 208 451 6188 Fax: +44 208 451 5450 WEB: www.light-craft.co.ukX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Lightcraft manufacturer: Other Similar products are found below : LC1850 LC8015LED LC1901 LC8064/TB LC8045LED/USB LC8064/WB LC8040LED LC1890 LC1875 LC8064/BB LC8082LED/EUK LC9090LED LC1764 LC1766 LC1780 LC1765