901006501

LED6w/500mA Constant Current LED Driver Standards Electrical Converter meets CE standards Load 1-6 VA Pending approval by UL as a Class 2 recognized Input Voltage 120-240-277 V 0/50/60Hz component Maximum Input Current 0.2A 120V File E193999 0.1A 240/277V VDE and VDE EMC pending Output Current 500mA 8% IP67 Output Voltage 2-14V Available Versions .HHH EMC (RFI) FCC Class A/EN 55015 Harmonics EN 61000-3-2 901006501- LED 6W DC 500mA (European version) Electrostatic Discharge IEC61000-4-2 901006501U- LED 6W DC 500mA (US version) EMC Immunity IEC61000-4-3 Burst IEC61000-4-4 Mechanical and Thermal .HHH Surge IEC61000-4-5 Injected RF IEC61000-4-6 European Version: Mains interruption IEC61000-4-11 Dimensions (mm) 45 x 45 x 25 Immunity EN 61547/61047 Weight 92.8 grams Safety EN 61347-2-13 Tc Max 90C SELV Ta Max 50C Output wire Red, Black single insulated Protection and Regulation 0.75mm 300 V 180C VDE 0250 Input wire Blue, Brown double insulated Electronic internal resettable short circuit 0.75mm 300 V 180C VDE 0250 protection. Thermal protection and overload US Version: regulation. Dimensions (in) 1.77 x 1.77 x 0.98 Weight 3.2 ounces Tc Max 90C Ta Max 50C Output wire Red, Blue single insulated 18 AWG 300V 200C UL1332 Input wire White, Black double insulated 18 AWG 300V 200C UL1332 Mounting Instructions max. 3m (118 ) BLACK WIRE BLUE WIRE From 1 to 3 leds BROWN WIRE in series. BLACK WIRE BLUE WIRE WHITE WIRE RED WIRE max. 3m (118 ) Safety Instructions 1. Always disconnect power before installation and / or removal of unit. 2. Install in accordance with national and local electrical codes. 3. Wires: Input and output wires 0.75mm or 18AWG + OUT1 OUT2 - LED 6 DC 500mA IN2 IN1