ANT-GPS-SH-xxx
Data Sheet
by
Product Description
Side
The SH Series is the flagship of the Antenna Factor
12.5 mm
(0.49")
GPS line. These high-performance GPS antennas
combine superior performance, advanced
operational and protection features, and low
power consumption. This makes them ideal for
45.0 mm
(1.77")
telematics, fleet management, navigation, tracking
and other applications that require a compact,
high-performance GPS antenna. For maximum
compatibility with the host receiver, the SH accepts
Top
supply voltages from +2.5VDC to +12VDC and is
protected against shorts, over current, or reverse
polarity situations. The antennas attach via a SMA,
MCX, MMCX or customer-specified connector.
36.6 mm
(1.44")
Features
10.6 mm
Compact
(0.42")
High-gain, low-noise design
Bottom
36.5 mm
Low current consumption
(1.44")
Wide operating voltage
Protection circuit
Wide operating temperature
11.0 mm
Fully weatherized
(0.43")
6.9 mm M2.6x0.45 Threads
Waterproof
(0.27")
3.0 mm (0.12) Deep
Rugged & damage-resistant
Magnetic mount
Electrical Specifications Electrical Specifications Cont.
Center Frequency: 1575.42MHz
Current: 510mA typ. @ 5V
Bandwidth: 10MHz @ 3dB point
(1113mA max. @ 12V)
Impedance: 50-ohms
Oper. Temp. Range: 30C to +85C
VSWR: 1.5 typ.
Mounting: Magnetic and/or screw
Ant. Gain: 5.0dB min.
Cable: RG-174U (Low-loss,
Axial Ratio: 1.0dB typ.
0.7dB/m)
Elev. Angle Cov.: 590 degrees
Cable Length: 117" +/6" (3m)
Az. Bearing Cov.: 360 degrees
Connector: SMA, MCX, MMCX, other
Polarization: RHCP
by special order
System Gain: 28dB (typ. includes 4dB
Weight: 3.32oz (94g)
cable & filter loss)
Ordering Information
Noise Figure: <1.8dB @ fo, 2dB max.
ANT-GPS-SH-SMA (with SMA connector)
Input Voltage: +2.5VDC to +12VDC
ANT-GPS-SH-MCX (with MCX connector)
(Autoswitch)
ANT-GPS-SH-MMX (with MMCX connector)
1
Revised 1/15/14