ANT-W63RPC1-UFL-100 Linx Technologies

Product Brief W63RPC1 Series Rigid Embedded Dipole WiFi 6 Antenna The ANT-W63RPC1 antenna delivers excellent WiFi/WLAN performance in the 2.4 GHz, 5 GHz and 6 GHz bands supporting both WiFi 6 and WiFi 6E. The rigid W63RPC1 provides a ground plane independent dipole embedded antenna solution comparable in performance to an external antenna. The W63RPC1 antennas adhesive backing makes it easy to mount in plastic enclosures, while allowing an environmentally sealed enclosure and protection from tampering or accidental antenna damage. Connection is made to the radio via 1.13 mm coaxial cable terminated in a U.FL-type, MHF4-type or cut-cable, available in several lengths. Features Applications Rigid internal mounting WiFi/WLAN coverage 3M 9888T permanent adhesive backing WiFi 6E (802.11ax) Compact, low-profile WiFi 6 (802.11ax) 42.0 mm x 11.0 mm x 1.3 mm WiFi 5 (802.11ac) Cable length options WiFi 4 (802.11n) 50 mm, 100 mm, 200 mm 802.11b/g Termination options 2.4 GHz ISM applications U.FL-type (MHF1, AMC, UMCC) Bluetooth MHF4-type ZigBee Cut cable for direct solder U-NII bands 1-8 Internet of Things (IoT) devices Smart Home networking Sensing and remote monitoring Ordering Information Part Number Description ANT-W63RPC1-UFL-50 WiFi 6 antenna with 50 mm (1.97 in) of 1.13 mm coaxial cable and U.FL-type plug (female socket) ANT-W63RPC1-UFL-100 WiFi 6 antenna with 100 mm (3.94 in) of 1.13 mm coaxial cable and U.FL-type plug (female socket) ANT-W63RPC1-UFL-200 WiFi 6 antenna with 200 mm (7.87 in) of 1.13 mm coaxial cable and U.FL-type plug (female socket) ANT-W63RPC1-MHF4-50 WiFi 6 antenna with 50 mm (1.97 in) of 1.13 mm coaxial cable and MHF4-type plug (female socket) ANT-W63RPC1-MHF4-100 WiFi 6 antenna with 100 mm (3.94 in) of 1.13 mm coaxial cable and MHF4-type plug (female socket) ANT-W63RPC1-MHF4-200 WiFi 6 antenna with 200 mm (7.87 in) of 1.13 mm coaxial cable and MHF4-type plug (female socket) ANT-W63RPC1-50 WiFi 6 antenna with 50 mm (1.97 in) of unterminated 1.13 mm coaxial cable ANT-W63RPC1-100 WiFi 6 antenna with 100 mm (3.94 in) of unterminated 1.13 mm coaxial cable ANT-W63RPC1-200 WiFi 6 antenna with 200 mm (7.87 in) of unterminated 1.13 mm coaxial cable Available from Linx Technologies and select distributors and representatives.W63RPC1 Antenna Product Brief Table 1. Electrical Specifications W63RPC1 ISM/WiFi WiFi/U-NII 1-4 WiFi 6E/U-NII 5-8 Frequency Range 2400 MHz to 2485 MHz 5150 MHz to 5850 MHz 5925 MHz to 7125 MHz VSWR (max) 1.8 2.1 1.6 Peak Gain (dBi) 3.7 6.1 5.9 Average Gain (dBi) -1.9 -1.9 -2.1 Efficiency (%) 69 69 66 Cross-Polar Discrimination > 22.5 > 6.0 > 6.0 Limit 360 beamwidth (dB) Beamwidth for XPD > 15 dB 360 300 340 Polarization Linear Impedance 50 Radiation Omnidirectional Max Power 5 W Wavelength 1/2-wave Electrical Type Dipole Operating Temp. Range -40 C to +85 C Cable Type and Lengths 50 mm (1.97 in), 100 mm (3.94 in) or 200 mm (7.87 in) of 1.13 mm OD coaxial cable Connection Options U.FL-type plug (female socket), MHF4-type plug (female socket) or cut-cable Dimensions Antenna element only, 43.0 mm x 11.0 mm x 1.3 mm (1.69 in x 0.43 in x 0.05 in) Weight 1.3 g to 1.9 g (0.05 oz to 0.07 oz) depending on cable length and connector type ESD Sensitivity NOT ESD sensitive. As a best practice, Linx may use ESD packaging. VSWR Figure 1 provides the voltage standing wave ratio (VSWR) across the antenna bandwidth. VSWR describes the power reflected from the antenna back to the radio. A lower VSWR value indicates better antenna performance at a given frequency. Reflected power is also shown on the right-side vertical axis as a gauge of the percentage of transmitter power reflected back from the antenna. 5 40 4 30 3 20 2 10 1 0 2300 2650 3000 3350 3700 4050 4400 4750 5100 5450 5800 6150 6500 6850 7200 Frequency (MHz) Figure 1. WF6RPC1 Antenna VSWR with Frequency Band Highlights Website: