MDEV-868-PRC Linx Technologies

TM HumPRC Series Master Development System User s Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Introduction damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 2 Ordering Information Property Safety Situations). TM 3 HumPRC Series Transceiver Carrier Board TM NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE 3 HumPRC Series Transceiver Carrier Board Objects SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY TM 3 HumPRC Series Transceiver Carrier Board Pin SITUATIONS. No OEM Linx Remote Control or Function Module Assignments should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 4 Programming Dock regulatory certification and warranty. 4 Programming Dock Objects 5 Remote Control Demo Board Customers may use our (non-Function) Modules, Antenna and Connectors as part of other systems in Life Safety Situations, but 5 Remote Control Demo Board Objects only with necessary and industry appropriate redundancies and 6 Prototype Board in compliance with applicable safety standards, including without limitation, ANSI and NFPA standards. It is solely the responsibility 6 Prototype Board Objects of any Linx customer who uses one or more of these products to TM 7 HumPRC Series Handheld Transmitter Evaluation incorporate appropriate redundancies and safety standards for the Life Board and Property Safety Situation application. 8 Long-range Handheld Transmitter Button Do not use this or any Linx product to trigger an action directly Assignments from the data line or RSSI lines without a protocol or encoder/ 8 Initial Setup decoder to validate the data. Without validation, any signal from another unrelated transmitter in the environment received by the module 10 Using the Programming Dock could inadvertently trigger the action. 11 Using the Remote Control Demo Board All RF products are susceptible to RF interference that can prevent 13 Using the Prototype Board communication. RF products without frequency agility or hopping 16 Using the Handheld Transmitter Evaluation Board implemented are more subject to interference. This module does have a frequency hopping protocol built in, but the developer should still be 17 Joining a Transmitter aware of the risk of interference. 18 The Development Kit Demonstration Software 25 Development Kit Demonstration Software Example Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could 31 Carrier Board Schematic cause product failure. Exceeding the reflow temperature profile could 32 Remote Control Demo Board Schematic cause product failure which is not immediately evident. 36 Programming Dock Board Schematic Do not make any physical or electrical modifications to any Linx 40 Prototype Board Schematic product. This will void the warranty and regulatory and UL certifications TM and may cause product failure which is not immediately evident. 43 HumPRC Series Evaluation Board Schematic