MDEV-900-RC Linx Technologies

TM HumRC Series Master Development System User s Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Introduction damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 2 Ordering Information Property Safety Situations). TM 3 HumRC Series Transceiver Carrier Board TM NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE 3 HumRC Series Transceiver Carrier Board Objects SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY TM 3 HumRC Series Transceiver Carrier Board Pin SITUATIONS. No OEM Linx Remote Control or Function Module Assignments should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 4 Programming Dock regulatory certification and warranty. 4 Programming Dock Objects 5 Remote Control Demo Board Customers may use our (non-Function) Modules, Antenna and Connectors as part of other systems in Life Safety Situations, but 5 Remote Control Demo Board Objects only with necessary and industry appropriate redundancies and 6 Prototype Board in compliance with applicable safety standards, including without limitation, ANSI and NFPA standards. It is solely the responsibility 6 Prototype Board Objects of any Linx customer who uses one or more of these products to 7 Initial Setup incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application. 8 Using the Programming Dock 9 Using the Remote Control Demo Board Do not use this or any Linx product to trigger an action directly 11 Using the Prototype Board from the data line or RSSI lines without a protocol or encoder/ decoder to validate the data. Without validation, any signal from 14 The Development Kit Demonstration Software another unrelated transmitter in the environment received by the module 23 Development Kit Demonstration Software Example could inadvertently trigger the action. 31 Carrier Board Schematic All RF products are susceptible to RF interference that can prevent 32 Remote Control Demo Board Schematic communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does have 36 Programming Dock Board Schematic a frequency hopping protocol built in, but the developer should still be 40 Prototype Board Schematic aware of the risk of interference. 43 Notes Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.