1812L150 Littelfuse

POLYFUSE Resettable PTCs Surface Mount > 1812L Series 1812L Series Description The 1812L Series device provides surface mount overcurrent protection for applications where resettable protection is desired. Features t P)4 DPNQMJBOU BOE 3 t X SFTJTU PBODF - lead-free t QSPmMF X P - t BVMU BTU SFTQPOTF UP G t PNQBUJCMF XJUI IJHI currents temperature solders t FT W PNQBDU EFTJHO TB board space Agency Approvals Applications AGENCY AGENCY FILE NUMBER t Z QSPUFDUJPO 1MVH BOE QMB t 1 * DBSET E183209 for motherboards and t (BNF DPOTPMF QPSU peripherals R50119118 protection t 64 QFSJQIFSBMT Electrical Characteristics Maximum Time Agency Resistance P d To Trip Approvals I I V I hold trip max max Part Number* Marking max. (A) (A) (Vdc) (A) R R R Current Time min typ 1max (W) (A) (Sec.) () () () XX 1812L010 LF010 0.10 0.30 30 100 0.8 0.50 1.50 1.600 7.000 15.000 XX 1812L014 LF014 0.14 0.34 60 10 0.8 1.50 0.15 1.500 4.000 6.000 XX 1812L020 LF020 0.20 0.40 30 100 0.8 8.00 0.02 0.800 2.900 5.000 XX 1812L050C LF050 0.50 1.00 15 100 0.8 8.00 0.15 0.150 0.600 1.000 XX 1812L075C LF075 0.75 1.50 13.2 100 0.8 8.00 0.20 0.100 0.260 0.450 XX 1812L075/24 LF075-24 0.75 1.50 24 100 0.8 8.00 0.20 0.110 0.200 0.290 XX 1812L075/33 LF075-33 0.75 1.50 33 20 0.8 8.00 0.20 0.110 0.260 0.400 XX 1812L110C LF110 1.10 2.20 6 100 0.8 8.00 0.30 0.040 0.120 0.210 XX 1812L110/16 LF110-16 1.10 1.95 16 100 0.8 8.00 0.50 0.060 0.120 0.180 XX 1812L110/33 LF110-33 1.10 1.95 33 20 0.8 8.00 0.50 0.060 0.120 0.200 XX 1812L125C LF125 1.25 2.50 15 100 0.8 8.00 0.40 0.050 0.160 0.250 XX 1812L125/6 LF125-6 1.25 2.50 6 100 0.8 8.00 0.40 0.050 0.090 0.140 XX 1812L150C LF150 1.50 3.00 8 100 0.8 8.00 0.30 0.040 0.070 0.110 XX 1812L150/12 LF150-12 1.50 3.00 12 100 0.8 8.00 0.50 0.040 0.070 0.110 XX 1812L150/24 LF150-24 1.50 3.00 24 20 0.8 8.00 1.50 0.040 0.070 0.120 XX 1812L160C LF160 1.60 2.80 8 100 0.8 8.00 1.00 0.030 0.066 0.100 XX 1812L160/12 LF160-12 1.60 2.80 12 100 0.8 8.00 1.00 0.030 0.066 0.100 XX 1812L200C LF200 2.00 3.50 8 100 0.8 8.00 2.00 0.020 0.040 0.060 XX 1812L260C LF260 2.60 5.00 6 100 0.8 8.00 2.50 0.015 0.030 0.047 I = Hold current: maximum current device will pass without tripping in 20C still air. P = Power dissipated from device when in the tripped state at 20C still air. hold d I = Trip current: minimum current at which the device will trip in 20C still air. R = Minimum resistance of device in initial (un-soldered) state. trip min V = Maximum voltage device can withstand without damage at rated current (I max) R = Typical resistance of device in initial (un-soldered) state. max typ I = Maximum fault current device can withstand without damage at rated voltage (V ) R = Maximum resistance of device at 20C measured one hour after tripping or reow max max 1max soldering of 260C for 20 sec. Caution: Operation beyond the specied rating may result in damage and possible arcing and ame. *Note: Some devices in this product series may have C in the Part Number. The C should be omitted when placing orders for the device. 2008 Littelfuse, Inc. Revised: October 24, 2008 1812L Series Specications are subject to change without notice. Please refer to www.littelfuse.com/series/1812L.html for current information. 1812L Series POLYFUSE Resettable PTCs Surface Mount > 1812L Series Temperature Rerating Ambient Operation Temperature -40C -20C 0C 23C 40C 50C 60C 70C 85C Part Number* Hold Current (A) 1812L010 0.16 0.14 0.12 0.10 0.08 0.07 0.06 0.05 0.03 1812L014 0.23 0.19 0.17 0.14 0.12 0.10 0.09 0.08 0.06 1812L020 0.29 0.26 0.23 0.20 0.17 0.15 0.14 0.12 0.10 1812L050C 0.77 0.68 0.59 0.50 0.44 0.40 0.37 0.33 0.29 1812L075C 1.15 1.01 0.88 0.75 0.65 0.60 0.55 0.49 0.43 1812L075/24 1.06 0.95 0.84 0.75 0.60 0.55 0.50 0.45 0.37 1812L075/33 1.10 1.00 0.88 0.75 0.66 0.60 0.56 0.47 0.36 1812L110C 1.59 1.43 1.26 1.10 0.95 0.87 0.80 0.71 0.60 1812L110/16 1.58 1.43 1.27 1.10 0.95 0.85 0.77 0.71 0.58 1812L110/33 1.55 1.40 1.25 1.10 0.93 0.83 0.73 0.63 0.50 1812L125C 2.00 1.75 1.52 1.25 1.00 0.95 0.90 0.75 0.53 1812L125/6 2.00 1.75 1.52 1.25 1.00 0.95 0.90 0.75 0.53 1812L150C 2.06 1.93 1.79 1.50 1.28 1.10 1.02 0.80 0.68 1812L150/12 2.04 1.88 1.68 1.50 1.25 1.10 1.00 0.80 0.60 1812L150/24 2.05 1.87 1.67 1.50 1.25 1.08 0.95 0.77 0.60 1812L160C 2.20 2.06 1.91 1.60 1.36 1.17 1.09 0.85 0.72 1812L160/12 2.18 2.01 1.79 1.60 1.34 1.16 1.07 0.83 0.60 1812L200C 3.08 2.71 2.35 2.00 1.80 1.60 1.50 1.07 0.80 1812L260C 4.00 3.52 3.06 2.60 2.34 2.08 1.95 1.39 1.04 *Note: Some devices in this product series may have C in the Part Number. The C should be omitted when placing orders for the device. Temperature Rerating Curve Average Time Current Curves 170% 150% 130% 1812L 100000 110% 90% 10000 70% 50% 1000 30% 10% -40 -30 -20 -10 0 10 20 30 40 5060 70 8085 100 Temperature (C) 10 1 0.1 0.01 0.1 1 10 100 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 2008 Littelfuse, Inc. Revised: October 24, 2008 1812L Series Specications are subject to change without notice. Please refer to www.littelfuse.com/series/1812L.html for current information. Percentage of Rated Current Time in Seconds 0.10A 0.14A 0.20A 0.50A 0.75A/33V 0.75A/24V 0.75A 1.10A/16V 1.10A/33V 1.10A 1.25A 1.25A/6V 1.50A/12V 1.50A 1.50A/24V 1.60A/12V 1.60A 1.60A/8V 2.00A 2.60A