Protection Relays Alternating Relays ARP SERIES Alternating Relay Description The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation or for continuous operation of either load. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN-rail mounted with an accessory socket. 8-PIN Operation Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. 11-PIN Note: Input voltage must be applied at all times for proper Wiring Diagram alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from SPDT 8-PIN DPDT 11-PIN the same supply as the units input voltage (see connection L1 N/L2 L1 N/L2 diagrams). Loss of input voltage resets the unit Load A becomes the lead load for the next operation. Duplexing (Cross-Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated. DPDT 8-PIN CROSS-WIRED Relay contacts in above are isolated. L1 N/L2 Features & Benefits V = VOLTAGE FEATURES BENEFITS LA = LOAD A Alternating or Flexibility to run unit alternating between the LB = LOAD B electrically locked two loads as normal or lock the relay to one S1 = PRIMARY CONTROL SWITCH operation specific load. S2 = LAG LOAD SWITCH Low profile Prevents accidental actuation selector switch LED status indication Visual indication of which load is engaged Industry standard Flexibility to use in many applications base connection Ordering Information LINE OUTPUT MODEL DESCRIPTION VOLTAGE FORM AR120A-3095 120VAC SPDT 8-pin for alternating applications. Rotary switch allows user to lock internal relay to one specific load. ARP23S 24VAC DPDT 8-pin cross-wired for duplexing applications. Rotary switch allows user to lock internal relay to one specific load. ARP41 120VAC SPDT 8-pin for alternating applications. ARP41S 120VAC SPDT 8-pin for alternating applications. Rotary switch allows user to lock internal relay to one specific load. ARP42S 120VAC DPDT 11-pin for alternating applications. Rotary switch allows user to lock internal relay to one specific load. ARP43 120VAC DPDT 8-pin cross-wired for duplexing applications. ARP43S 120VAC DPDT 8-pin cross-wired for duplexing applications. Rotary switch allows user to lock internal relay to one specific load. ARP61S 230VAC SPDT 8-pin for alternating applications. Rotary switch allows user to lock internal relay to one specific load. ARP62S 230VAC DPDT 11-pin for alternating applications. Rotary switch allows user to lock internal relay to one specific load. ARP63S 230VAC DPDT 8-pin cross-wired for duplexing applications. Rotary switch allows user to lock internal relay to one specific load. If you dont find the part you need, call us for a custom product 800-843-8848 2018 Littelfuse Protection Relays & Controls Rev: 1-A-101118Rev: 1-A-060216 wwwwwwwww.littelfuse.com/arp.littelfuse.com/.littelfuse.com/Protection Relays Alternating Relays ARP SERIES Accessories Specifications Input BZ1 Front Panel Mount Kit Tolerance Provides an easy method of through-the-panel 24VAC -15% to 20% mounting of 8- or 11-pin plug-in timers, flashers, and other controls. 120 & 230VAC -20% to 10% AC Line Frequency 50/60Hz NDS-8 Octal 8-pin Socket Output 8-pin 35mm DIN rail or surface mount. Rated Type Electromechanical relay at 10A 300VAC. Surface mounted with two Form SPDT, DPDT, or cross-wired DPDT 6 (M 3.5 x 0.6) screws or snaps onto a 35 mm Rating 10A resistive 120/240VAC & 28 VDC DIN rail. Uses PSC8 hold-down clips. 1/3 hp 120/240VAC Maximum Voltage 250VAC NDS-11 11-pin Socket 7 6 Life Mechanical - 1 x 10 Electrical - 1 x 10 1-pin 35mm DIN rail or surface mount. Rated Protection at 10A 300VAC. Surface mounted with two 6 (M 3.5 x 0.6) screws or snaps onto a 35 mm Isolation Voltage 1500V RMS input to output DIN rail. Uses PSC11 hold-down clips. Mechanical Mounting Plug-in socket PSC8 or PSC11 Hold-down Clips Dimensions H 60.7 mm (2.39) W 45.2 mm (1.78) Securely mounts plug-in controls in any position. D 81.3 mm (3.2) Provides protection against vibration. Use PSC8 Termination Octal 8-pin or magnal 11-pin with NDS-8 Octal Socket or PSC11 with NDS-11 Environmental Socket. Sold in pairs. Operating/Storage C103PM (AL) DIN Rail Temperature -20 to 60C / -30 to 85C 35 mm aluminum DIN rail available in a 36 in. Weight 5.6 oz (159 g) approx. (91.4 cm) length. NOTE: Unit does not have debounce time delay. Disclaimer Notice Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/product-disclaimer. 2018 Littelfuse Protection Relays & Controls Rev: 1-A-101118Rev: 1-A-060216 wwwwwwwww.littelfuse.com/.littelfuse.com/.littelfuse.com/arp