Flashers and Tower Lighting Controls Flashers FS100 SERIES Low Current Flasher Description The FS100 Series (low current) may be used to control inductive, incandescent or resistive loads. This series offers a 1A (fullwave) or a 2A (halfwave) steady state, 10A inrush solid-state output and may be ordered with an input voltage of 24 or 120VAC. The FS100 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 45 to 150 FPM. Ideal for OEM applications where cost is a factor. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Features & Benefits Wiring Diagram FEATURES BENEFITS L1 N Compact Size: Ideal for OEM applications V = Voltage 38 x 23.9mm (1.5 x 0.94) L = Load Custom Flash Tailor to specific application: custom rates range R = Red Wire Rates Available from 45 to 150 FPM B = Black Wire Accessories P1023-2 P Clamp Mounting Bracket Alum. 15/16 Ordering Information MODEL INPUT VAC OUTPUT RATING A OUTPUT TYPE AC LOAD TYPE FLASH RATE FS126 120 1 Fullwave Incandescent & Resistive 75 FPM FS126-45 120 1 Fullwave Incandescent & Resistive 45 FPM FS126-60 120 1 Fullwave Incandescent & Resistive 60 FPM FS126RC 120 1 Fullwave Incandescent, Resistive, & Inductive 75 FPM FS126RC-45 120 1 Fullwave Incandescent, Resistive, & Inductive 45 FPM FS127 120 2 Halfwave Incandescent & Resistive 75 FPM FS146 24 1 Fullwave Incandescent & Resistive 75 FPM Specifications FS146RC 24 1 Fullwave Incandescent, Resistive, & Inductive 75 FPM If you dont find the part you need, call us for a custom product 800-843-8848 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062116 www.littelfuse.com/fs100LowcurrentFlashers and Tower Lighting Controls Flashers FS100 SERIES Specifications Flasher Function Diagram Technical Data V = Voltage FLASHER (OFF FIRST) Operation OFF/ON solid-state flasher (continuous duty) R = Reset Flash Rate Factory fixed at 75 FPM 20% L = Load Custom Flash Rates Available From 45-150 FPM 20% T1 = ON Time ON/OFF Ratio 50% T2 = OFF Time Input T1 T2 Voltage 24, 120VAC, 15% AC Line Frequency 50/60Hz Output Output Fullwave AC or Halfwave rectified AC Load Type Incandescent, resistive, or inductive (Choose RC suffix for inductive loads) Maximum Load Rating Fullwave: 1A steady state Halfwave: 2A steady state Inrush 10A Mechanical Mounting Removable mounting bracket, use one 8 (M4 x 0.7) screw Connection/Wires 18 AWG (0.82mm2) wires 6 in. (15.2cm) Dimensions H 38.1 mm (1.5) W 23.9 mm (0.94) Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20 to 60C / -40 to 85C Humidity 95% relative, non-condensing Weight 1.1 oz (31 g) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062116 www.littelfuse.com/fs100Lowcurrent