Flashers and Tower Lighting Controls Flashers FS200 SERIES Description The FS200 Series may be used to control inductive, incandescent, or resistive loads. Factory fixed flash rate of 45 or 90 FPM or may be ordered with a fixed custom flash rate ranging from 10 to 180 FPM. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications. Operation Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2. Features & Benefits Wiring Diagram FEATURES BENEFITS 3A steady, 30A inrush, Provides direct control of inductive, incandescent, or SPST output contact resistive loads No moving parts to arc and wear out over time and Totally solid state encapsulated to protect against shock, vibration, and encapsulated and humidity High inrush current V = Voltage Ideal for general industrial applications capability and low RFI L = Load Accessories P1023-6 Mounting bracket The 90 orientation of mounting slots makes installation/removal of modules quick and easy. P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. P1015-18 Quick Connect to Screw Adapter Ordering Information Screw adapter terminal designed for use with MODEL INPUT RATING FLASH RATE all modules with 0.25 in. (6.35 mm) male quick connect terminals. FS219-45 12VDC 20% 3A 45 FPM C103PM (AL) DIN Rail FS224 24VDC 20% 3A 90 FPM 35 mm aluminum DIN rail available in a 36 in. If you dont find the part you need, call us for a custom product 800-843-8848 (91.4 cm) length. P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two 10 screws. Specifications 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs200Flashers and Tower Lighting Controls Flashers FS200 SERIES Specifications Flasher Function Diagram Technical Data V = Voltage Operation OFF/ON solid-state flasher (continuous duty) FLASHER (OFF FIRST) R = Reset Flash Rate Fixed at 90 FPM 10% L = Load Custom Flash Rate 10 - 180 FPM T1 = ON Time ON/OFF Ratio 50% T2 = OFF Time Input T1 T2 Voltage 12, 24, 36, 48, or 110VDC Output Load Type Inductive, resistive, or incandescent Maximum Load Rating 0.25 - 3A steady state OFF State Leakage Current 12 & 24VDC 250 A Inrush 10 times steady state current Mechanical Mounting Surface mount with one 10 (M5 x 0.8) screw Dimensions H 50.8 mm (2) W 50.8 mm (2) D 30.7 mm (1.21) Termination 0.25 in. (6.35 mm) male quick connect terminals Protection Circuitry Encapsulated Environmental Operating/Storage Temperature -20 to 60C / -40 to 85C Weight 2.2 oz (62 g) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/fs200