LPMG12

Protection Relays Current Monitoring Relays and Transducers LCS10T12 / LPM SERIES Current Indicators Description The LCS10T12 connected to the LPM12 or LPMG12 indicator is a low cost, easy to use, go/no-go indication system for the remote monitoring of current flow. The LCS10T12 is installed on an adequately insulated wire of the monitored load. Its 12in. (30.4cm) leads are connected to the LPM12 or LPMG12 panel mount indicator directly or via customer supplied wires up to 500 feet (152.4m) long. Operation When the monitored current is 5A turns, the panel mount LPM indicator will glow. The LCS10T12 is designed to maximize the light output of the panel mount indicator. It can be used to monitor current flow of less than 5A by passing the monitored conductor 2 or more times through the sensor. CAUTION: The LCS10T12 must be connected to the LPM12 or LPMG12 before current flows to prevent damage or a shock hazard. Monitored wires must be properly insulated. Wiring Diagram Panel mount indicator designed to match the output of the LCS10T12. The LPM12 and LPMG12 come with 12 in. (30.4 cm) wires and a one piece mounting clip. Both devices install quickly Wire Length: 500 ft. in a 0.25 in. (6.35 mm) hole in panels from 0.031 - 0.062 in. (152.4m) max. (0.79 - 1.6 mm) thick. (Customer Supplied) CAUTION: The LCS10T12 must Features be connected to the LPM12 or JJ Low cost go/no go indication LPMG12 before current flows JJ to prevent damage or shock May be connected to wires up to 500 feet (152.4 m) long hazard. Monitored wires must JJ Remote monitoring of currents up to 50A be properly insulated. JJ Green or red LED indicator available Specifications Monitored Current Current Range 2 - 50A AC Wire Passes Min. Current Max. Current Max. Inrush Max. Wire Dia. 1 5A 50A 120A 0.355 in. (9.0 mm) 2 2.5A 25A 60A 0.187 in. (4.7 mm) 3 1.7A 16.6A 40A 0.15 in. (3.8 mm) 4 1.3A 12.5A 30A 0.125 in. (3.2 mm) Ordering Information 5 5/X 50/X 120/X Maximum Current 50A turns continuous MODEL DESCRIPTION AC Line Frequency 50/60Hz DC Resistance of LCS10T12 AC Current Sensor Current Limiter 65 Mechanical LPM12 Red LED Indicator 2 Sensor Hole 0.36 in. (9.14 mm) for up to 4 AWG (21.1 mm ) LPMG12 Green LED Indicator THHN wire Termination 12 in. (30.4 cm) wire leads If you dont find the part you need, call us for a custom product 800-843-8848 Environmental Operating/Storage Temperature -40 to 60C/-40 to 85C Weight LCS: 0.8 oz (23 g) LPM: 0.2 oz (6 g) 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062716 wwwwww.littelfuse.com/.littelfuse.com/lcs-lpmX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Industrial Current Sensors category: Click to view products by Littelfuse manufacturer: Other Similar products are found below : CSNS181 CSNS300M-001 5SHT-151-E 7SHT-301-E SAO-Q1N SAO-Q2N CSCA0075A000U12J01 SAO-S1N L34S1T5D15T BB- JC36S500-V BB-JC24S250-V CSNS300M-500 LA200-P ACS724LLCTR-10AB-T LPMG12 DCSA50 ECS40BC A-CS010B A-CS050B A-CS100B A-CS200B ACS758LCB-100B-PFF-T ACS712ELCTR-20A-T CS010GT12 CS030EK1 CS050B CS050BT12 CS100B CS200B CS200BKT5 CS200BT24 CS300B CS400B CS600B CSM006NPT3.3 CSM010PST5 CSM010SYA CSM015NPT5 CSM015SY CSM025AY CSM050LA/50mA CSM100AP/1:2000 CSM100LA/50mA DS050LTA CC6903SO-30A CC6904SO-20A 20310200101 20310200102 20310500101 20311000101