Axial Lead Reed Switches Low Power > MDSR-10 MDSR-10 10.2mm Sub-miniature Reed Switch RoHS Description The MDSR-10 Reed Switch is a sub-miniature, normally open switch with a 10.16mm long x 1.80mm diameter (0.400 x 0.071) glass envelope, capable of switching 200Vdc at 10W. It has high insulation resistance of 10 ohms minimum and low contact resistance of less than 120 milli-ohms. This reed switch is also available in a surface mount version, that is, MDSM-10. Features 12 10 Ohms insulation resistance Sub-miniature normally Available sensitivity range open switch 10-25 AT Capable of switching 200Vdc or 0.5A at up to 10W Agency Approvals Agency Agency File Number Ampere-Turns Range Benefits E47258 Zero operating power required Hermetically sealed switch 10-25 AT E471070 for contact contacts are not affected by and Excellent for switching have no effect on their external Note: Contact Littelfuse for specific agency approval ratings. microcontroller logic level loads environment Low space requirement Applications Dimensions Reed Relays (particularly suited Limit Switching Dimensions in mm (inch) to ATE type applications) Office Equipments 20.19 Security Systems (.795) REF. 0.43 1.80 CL OF OVERLAP (.017) DIA. REF. (.071) MAX. Switch Type Contact Form A (SPST-NO) 14.39 10.16 (.595) MIN. (.400) MAX. Body: Glass 40.38 Materials Leads: Tin-plated Ni-Fe wire (1.590) NOM. Note: SPST-NO = Single-pole, single-throw, normally open Electrical Ratings 1 Contact Rating W/VA - max. 10 2 Switching Vdc - max. 200 3 Voltage Vac - max. 140 4 Breakdown Vdc - min. 250 2 Switching Adc - max. 0.50 3 Current Aac - max. 0.35 Carry Adc - max. 1.00 Contact, Initial - max. 0.120 Resistance 12 Insulation - min. 10 Capacitance Contact pF - typ. 0.2 Operating C -40 to +125 Temperature 5 Storage C -65 to +125 Notes: 1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information. 2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details. 3. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load. 4. Breakdown Voltage - per MIL-STD-202, Method 301. 5. Storage Temperature - Long time exposure at elevated temperature may degrade solderability of the leads. 2020 Littelfuse Revised: BO.12/08/20 littelfuse.com Specifications are subject to change without notice.Axial Lead Reed Switches Low Power > MDSR-10 MDSR-10 10.2mm Sub-miniature Reed Switch Product Characteristics Operating Characteristics 1 Operate Time 0.5ms - max. 1 Release Time 0.1ms - max. 2 Shock 11ms 12 sine wave 100G - max. 2 Vibration 50-2000 Hertz 30G - max. Resonant Frequency 8.5kHz - typ. Magnetic Characteristics 3 Pull-In Range Ampere Turns 10-25 4 Rating Sensitivity Ampere Turns 15 Test Coil L4989 Notes: 1. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A,diode suppressed coil (Coil II). 2. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202. 3. Pull-In Range - Contact Littelfuse for narrower AT ranges available. 4. Rating Sensitivity - The value at which contact ratings and operating characteristics are determined. Derating may be required below this value. 5. Custom modifications of forming and/or cutting of reed switches are available. Please contact Littelfuse. Drop-Out vs. Pull-In Chart Part Numbering System 25 MDSR-10-10-15 Max. 20 Series 15 AT Range 10-25 AT Min. Example: 10 10-15 AT 10-15 AT product is 15-20 AT MDSR-10-10-15 20-25 AT 5 Note: These AT values are the before-modification values of the bare reed switch. 0 0 5 10 15 20 25 30 35 Pull-In (AT, L4989 Coil) Note: Chart represents the range of Drop-Out, min to max for a given Pull-In value. Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width Bulk Bulk 1000 N/A N/A 2020 Littelfuse Revised: BO.12/08/20 littelfuse.com Specifications are subject to change without notice. Drop-Out (AT, L4989 Coil)