P2300SDLRP Littelfuse

SIDACtor Protection Thyristors High Surge Current Protection RoHS e3 High Surge Current Series - DO-214 Pb Description The High Surge Current DO-214 Series are SIDACtor thyristors designed to protect equipment located in hostile environments from overvoltage transients. The series provides a 200A 10/1000 s rated surface mount solution that enables equipment to comply with enhanced surge requirments now specified in regulatory and customer requirements. Features and Benefits Low voltage overshoot Rating Low on-state voltage 1000A 2x10 Surge Rating Agency Approvals Does not degrade surge capability after RoHS Compliant and Agency Agency File Number multiple surge events Halogen-Free within limit. Pb-free E3 means 2nd E133083 Fails short circuit when level interconnect is surged in excess of Pb-free and the terminal Pinout Designation ratings finish material is tin(Sn) (IPC/JEDEC J-STD- 200A 10x1000 Surge Not Applicable 609A.01) Applicable Global Standards Schematic Symbol TIA-968-A GR 1089 Intra-building TIA-968-B IEC 61000-4-5 2nd edition ITU K.20/21/45 Enhanced Level YD/T 1082 ITU K.20/21/45 Basic YD/T 993 Level YD/T 950 GR 1089 Inter-building Electrical Characteristics V V V Capacitance DRM S T I I I H S T** l =5A 100V/s I =2.2A 1MHz, 2V bias Part Number Marking DRM T V min V max mA min mA max A max V max pf min pF max P0080SDLRP P-8D 6 25 50 800 2.2 4 50 150 P0640SDLRP P06D 58 77 50 800 2.2 4 100 160 P0720SDLRP P07D 65 88 50 800 2.2 4 100 150 P0900SDLRP P09D 75 98 50 800 2.2 4 95 140 P1100SDLRP P11D 90 130 50 800 2.2 4 75 115 P1300SDLRP P13D 120 160 50 800 2.2 4 65 100 P1500SDLRP P15D 140 180 50 800 2.2 4 60 90 P1800SDLRP P18D 170 220 50 800 2.2 4 50 90 P2300SDLRP P23D 190 260 50 800 2.2 4 50 80 P2600SDLRP P26D 220 300 50 800 2.2 4 50 75 P3100SDLRP P31D 275 350 50 800 2.2 4 45 70 P3500SDLRP P35D 320 400 50 800 2.2 4 45 65 Notes: - Absolute maximum ratings measured at T = 25C (unless otherwise noted). A - Components are bi-directional (unless otherwise noted). ** Will meet 4.4A power cross requirement without fire hazard. 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/16/16 SIDACtor Protection Thyristors High Surge Current Protection Surge Ratings I PP I TSM 1 1 1 1 1 1 1 1 1 di/dt 0.2/310 2/10 8/20 10/160 10/560 5/320 10/360 10/1000 5/310 50/60 Hz 2 2 2 2 2 2 2 2 2 0.5/700 2/10 1.2/50 10/160 10/560 9/720 10/360 10/1000 10/700 A min A min A min A min A min A min A min A min A min A min A/s max D 1000 800 200 350 50 1000 Notes: 1 Current waveform in s - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium. PP 2 Voltage waveform in s - I ratings applicable over temperature range of -40C to +85C PP - The component must initially be in thermal equilibrium with -40C < T < +150C J Thermal Considerations Package Symbol Parameter Value Unit DO-214AA T Operating Junction Temperature Range -40 to +150 C J T Storage Temperature Range -65 to +150 C S R Thermal Resistance: Junction to Ambient 90 C/W 0JA V-I Characteristics t x t Pulse Waveform r d +I t = rise time to peak value r t = decay time to half value d Peak I 100 T Value I S Waveform = t x t r d I H I DRM -V +V 50 Half Value V V DRM T V S 0 t t r d 0 t Time (s) -I Normalized V Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature S 2.0 14 1.8 12 1.6 10 8 1.4 6 25C 1.2 25 C 4 1.0 2 0 0.8 -4 0.6 -6 0.4 -8 -40 -20 020406080100 120140 160 -40 -20 020406080100 120140 160 Junction Temperature (T ) C Case Temperature (T ) - C J C 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/16/16 Series Percent of V Change % S I I Peak Pulse Current %I H PP PP Ratio of I (T = 25C) H C