PCR11

Flashers and Tower Lighting Controls Tower and Obstruction Lighting Controls PCR SERIES Photo Control Description The PCR Series of photo controls is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. Designed and built to meet the demands of the most rigorous requirement of tower and obstruction lighting control, each unit is factory calibrated to meet FAA and FCC specifications. Electronic circuit, output contactor, and terminal block are all contained within front plastic housing. Edge support molded into the bottom edge of housing allows easy wiring of new and existing installations. Available with or without cast aluminum junction box. Operation When the amount of light sensed falls below the actuation level Wiring Diagram for energization, the output relay energizes. Conversely, when the amount rises above the actuation level for de-energization, the output relay de-energizes. Dashed lines are internal connections. Features & Benefits FEATURES BENEFITS ABS plastic housing with Withstands outdoor environmental hazards and gasket seal protects circuitry from moisture damage Allows direct control of a lighting circuit without a Two 20A relay contacts separate contactor Fixed time delay Eliminates contact chatter Provides automatic lighting circuit operation from Reliable photo sensor dusk to dawn Ordering Information REPLACES Dashed lines are internal connections. MODEL INPUT DESCRIPTION Hughey Crouse & Phillips Hinds Photo Control without PCR10 120VAC n/a n/a aluminum box Photo Control without 120VAC PCR11 PC800 120V PEC52010 aluminum box Photo Control with PCR12 230VAC n/a n/a aluminum box Dashed lines are internal connections. Dashed lines are internal connections. Photo Control with PCR13 230VAC PC800 240V PEC52010-1 aluminum box If you dont find the part you need, call us for a custom product 800-843-8848 *Customer Supplied Jumper Dashed lines are internal connections. 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/pcrFlashers and Tower Lighting Controls Tower and Obstruction Lighting Controls PCR SERIES Specifications Indication LED indicates power is applied Light Actuation Levels (Factory Calibrated) Energized: 35 fc De-energized: 60 fc Voltage 120VAC or 230VAC AC Line Frequency 50/60Hz Tolerance 120 & 230VAC -20% - 10% Output Rating Two SPST NO 20A contacts 1 hp 120VAC 2.5 hp 240VAC Termination Screw terminals for up to 8 (M4 x 0.7) AWG wire Dimensions H 159.51 mm (6.28) W 127 mm (5.0) D 131.75 mm (5.19) Mounting ABS plastic housing with gasket seal. Multiple knockout holes for optional mounting to Crouse Hinds or Hughey & Phillips cast aluminum electrical boxes. Operating/Storage Temperature -40 to 60C / -55 to 85C 2016 Littelfuse Protection Relays & Controls Rev: 1-A-062316 www.littelfuse.com/pcr