Teccor brand Thyristors 8 Amp Alternistor Quadrac for LED dimmer applications RoHS Q6008LTH1LED Series Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense by eliminating the need for separate Triac and DIAC components. Q6008LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 6mA maximum, this Quadrac series is characterized and specified to perform best with LED loads. The Q6008LTH1LED series is best suited for LED dimming controls to obtain the lowest levels of light output with a minimum probability of flickering. Q6008LTH1LED series is offered in the industry standard Agency Approval TO-220AB package with an isolated mounting tab that makes it best suited for adding an external heat sink. Agency Agency File Number L Package : E71639 Main Features Features Benefits A s low as 6mA max Provides full control Symbol Value Unit holding current of light out put at the I 8 A T(RMS) extreme low end of load V / V 600 V conditions. DRM RRM DIAC V 33 to 43 V U L recognized TO-220AB 2 5 0 0 V min isolation BO AC package between mounting tab and active terminals Improves margin of safe 11 0C rated junction Schematic Symbol temperature operation with less heat sinking required E nable survivability di/dt performance of of typically LED load 70A/s MT2 MT1 operating characteristics S implicity of circuit design Q UADRAC version T & layout includes intergrated DIAC RoHS compliant Additional Information Applications Excellent for AC switching and phase control applications such as lighting and motor speed controls. Typical applications are AC solid-state switches, light dimmers with LED loads, small low current motor in power tools, Datasheet Resources Samples and low current motors in home/brown goods appliances. Internally constructed isolated package is offered for ease of heat sinking with highest isolation voltage. 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 Teccor brand Thyristors 8 Amp Alternistor Quadrac for LED dimmer applications Absolute Maximum Ratings Symbol Parameter Value Unit I RMS forward current Tc = 80C 8 A T(RMS) single half cycle f = 50Hz 80 T (initial) = 25C J I Peak non-repetitive surge current A TSM single half cycle f = 60Hz 85 T (initial) = 25C J 2 2 2 I t I t value for fusing t = 8.3ms 30 A s p di/dt Critical rate-of-rise of on-state current f = 60Hz T =110C 70 A/s J I Peak gate current T = 110C 1.5 A GM J Storage temperature range -40 to 150 C T stg T Operating junction temperature range -40 to 110 C J Electrical Characteristics (T = 25C, unless otherwise specified) Alternistor Quadrac J Symbol Test Conditions Value Unit I I = 15mA (initial) MAX. 6 mA H T dv/dt V = V gate open T =110C MIN. 50 V/s D DRM J dv/dt(c) di/dt(c) = 0.54 x I / ms T = 110C MIN. 10 V/s T(rms) J t (note 1) TYP. 3 s gt (1) Reference test circuit in figure 7 and waveform in figure 8 C = 0.1F with 0.1s rise time. T Trigger DIAC Specifications Symbol Test Conditions Value Unit V Breakover Voltage Symmetry MAX. 3 V BO MIN. 33 V Breakover Voltage, forward and reverse V BO MAX. 43 V Dynamic Breakback Voltage, forward and reverse (note 1) MIN. 5 V I Peak Breakover Current MAX. 25 uA BO C Trigger Firing Capacitance MAX. 0.1 F T (1) Reference test circuit in figure 7 and waveform in figure 8. Static Characteristics Symbol Test Conditions Value Unit V I = 1.41 x I A t = 380s MAX. 1.6 V TM T T(rms) p T = 25C 10 J I / I V / V MAX. A DRM RRM DRM RRM T = 110C 500 J Thermal Resistances Symbol Parameter Value Unit Junction to case (AC) 2.8 C/W R (J-C) Junction to ambient 50 C/W R (J-A) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16