SIDACtor Protection Thyristors TM Broadband Optimized Protection RoHS e3 SDP Biased Series - SOT23-6 Pb Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, ADSL2, and ADSL2+ with minimal effect on data signals. This silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount SOT23-6 package provides a surge capability that exceeds most worldwide standards and recommendations for lightning surge withstand capability of tertiary protectors. Features & Benefits Compatible with VDSL2 Response time under Agency Approvals (30MHz) and with G.fast 500ns (106MHz) R oHS Compliant Agency Agency File Number B alanced overvoltage Pb-free E3 means 2nd le vel E133083 protection interconnect is Pb-free and L ow distortion the terminal finish material is tin(Sn) (IPC/JEDEC Pinout Designation & Schematic Symbol Low insertion loss J-STD-609A.01) Low profile Applicable Global Standards 1 6 ANSI C62.41 IEC 61000-4-2 level 4 IEC 61000-4-12 -- 15kV (air discharge) 2 5 IEC 61000-4-5, 30A -- 8kV ( contact discharge) (t =8/20s) 2nd edition P 3 4 Additional Information Datasheet Resources Samples Absolute Maximum Ratings between pin1 and pin 3, Ta= 25C (Unless otherwise noted) I Maximum Junction pp Storage Temperature Range Temperature Part Number Marking 8/20s C C A Max 1 SDP0240T023G6RP P24 150 -65 to 150 30 Notes: 1. The device must be in thermal equilibrium at 25C Electrical Characteristics between pin 1 and pin 3, Ta = 25C Delta Co V I DRM DRM V 1V/s I I Co f=1MHz,2V Line Bias S H S I =100nA V =19V Part Number Marking DRM DRM = 1 V to 19 V V min pA typ V max mA typ mA min pF max pF max P24 19 300 29 40 10 3.0 0.5 SDP0240T023G6RP 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 SIDACtor Protection Thyristors TM Broadband Optimized Protection Typical capacitance against line voltage (without V-I: Characteristics external bias) 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8101214 16 18 20 Voltage (Volt) Surge Ratings I PP 1 2 1.2/50s / 8/20s Series A min G 30 Notes: 1 Voltage waveform in s 2 Current waveform in s - Peak pulse current rating (I ) is repetitive and guaranteed for the life of the product that PP remains in thermal equilibrium. - The component must be in thermal equilibrium at 25C. Thermal Information Parameter Rating Units Storage Temperature Range -65 to 150 C Maximum Junction Temperature 150 C Maximum Lead Temperature (Soldering 10s) 260 C 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 02/23/17 Capacitance (pF)