TVS Diodes Surface Mount 600W > TPSMA6L series TPSMA6L Series RoHS Pb e3 Description Uni-directional The TPSMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events, and its especially suitable for high reliability and automotive application. SMA low profile package (DO221-AC) has the same electronical performance as the SMB package but with low height profiles (1.1mm). Agency Approvals Features Same power as standard Fast response time: Agency Agency File Number SMB devices (600 W) typically less than 1.0ns E230531 from 0 Volts to V min Hi reliability application BR and automotive grade Built-in strain relief AEC Q101 qualified Glass passivated junction Maximum Ratings and Thermal Characteristics SMA low profile package: High temperature O (T =25 C unless otherwise noted) less than 1.1 mm soldering: 260C/10 A Footprint compatibility seconds at terminals Parameter Symbol Value Unit with standard SMA and Plastic pac kage has Peak Pulse Power Dissipation at T =25C A SMB products (easy to underwriters laboratory by 10x1000s Waveform (Fig.2)(Note 1), P 600 W PPM layout) (Note 2) ammabilitfl y V-0 Typical failure mode is Typical maximum Power Dissipation on Infinite Heat Sink P 3 W short from over-specified O M(AV) at T =50 C temperature coefficient A voltage or current V = 0.1% x V 25C x T BR BR Peak Forward Surge Current, 8.3ms I 60 A Whisker test is conducted FSM Single Half Sine Wave (Note 3) Mat te tin leadfree plated based on JEDEC Maximum Instantaneous Forward Halogen free and RoHS JESD201A per its table 4a Voltage at 25A for Unidirectional V 3.5V V F compliant Only and 4c Pb-free E3 means 2nd Operating Junction and Storage IEC-61 000-4-2 ESD T , T -65 to 150 C J STG Temperature Range level interconnect is Pb- 30kV(Air), 30kV (Contact) free and the terminal Typical Thermal Resistance Junction to ESD protection of dat a R 35 C/W JL Lead lines in accordance with IEC 61000-4-2 Typical Thermal Resistance Junction to R 200 C/W JA Ambient EFT protection of data Notes: lines in accordance with 1. Non-repetitive current pulse, per Fig.4 and derated above T =25C per Fig. 3. A IEC 61000-4-4 (IEC801-4) 2. Mounted on 5.0x5.0mm copper pad to each terminal. Low inductance, excellent 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional clamping capability device only. Functional Diagram Applications Bi-directional TVS devices are ideal for the protection of I/O Interfaces, V bus and other vulnerable circuits used in Telecom, CC Computer, Industrial and Consumer electronic applications. Cathode Anode Uni-directional 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.12/29/20TVS Diodes Surface Mount 600W > TPSMA6L series Electrical Characteristics Maximum Breakdown Test Reverse Maximum Agency Part Clamping Maximum Peak Voltage V Current Stand off BR Reverse Leakage Approval Number Marking Voltage V Pulse Current C (Volts) I Voltage V I V T I R R R (Uni) T I I (A) pp pp (Volts) (A) MIN MAX (mA) (V) TPSMA6L5.0A AEA 5.0 6.40 7.00 10 9.2 65.3 800 X TPSMA6L6.0A AGA 6.0 6.67 7.37 10 10.3 58.3 800 X TPSMA6L6.5A AKA 6.5 7.22 7.98 10 11.2 53.6 500 X TPSMA6L7.0A AMA 7.0 7.78 8.60 10 12.0 50.0 200 X TPSMA6L7.5A APA 7.5 8.33 9.21 1 12.9 46.6 100 X TPSMA6L8.0A ARA 8.0 8.89 9.83 1 13.6 44.2 50 X TPSMA6L8.5A ATA 8.5 9.44 10.40 1 14.4 41.7 20 X TPSMA6L9.0A AVA 9.0 10.00 11.10 1 15.4 39.0 10 X TPSMA6L10A AXA 10.0 11.10 12.30 1 17.0 35.3 5 X TPSMA6L11A AZA 11.0 12.20 13.50 1 18.2 33.0 1 X TPSMA6L12A BEA 12.0 13.30 14.70 1 19.9 30.2 1 X TPSMA6L13A BGA 13.0 14.40 15.90 1 21.5 28.0 1 X TPSMA6L14A BKA 14.0 15.60 17.20 1 23.2 25.9 1 X TPSMA6L15A BMA 15.0 16.70 18.50 1 24.4 24.6 1 X TPSMA6L16A BPA 16.0 17.80 19.70 1 26.0 23.1 1 X TPSMA6L17A BRA 17.0 18.90 20.90 1 27.6 21.8 1 X TPSMA6L18A BTA 18.0 20.00 22.10 1 29.2 20.6 1 X TPSMA6L20A BVA 20.0 22.20 24.50 1 32.4 18.6 1 X TPSMA6L22A BXA 22.0 24.40 26.90 1 35.5 16.9 1 X TPSMA6L24A BZA 24.0 26.70 29.50 1 38.9 15.5 1 X TPSMA6L26A CEA 26.0 28.90 31.90 1 42.1 14.3 1 X TPSMA6L28A CGA 28.0 31.10 34.40 1 45.4 13.3 1 X TPSMA6L30A CKA 30.0 33.30 36.80 1 48.4 12.4 1 X TPSMA6L33A CMA 33.0 36.70 40.60 1 53.3 11.3 1 X TPSMA6L36A CPA 36.0 40.00 44.20 1 58.1 10.4 1 X TPSMA6L40A CRA 40.0 44.40 49.10 1 64.5 9.3 1 X TPSMA6L43A CTA 43.0 47.80 52.80 1 69.4 8.7 1 X TPSMA6L45A CVA 45.0 50.00 55.30 1 72.7 8.3 1 X TPSMA6L48A CXA 48.0 53.30 58.90 1 77.4 7.8 1 X TPSMA6L51A CZA 51.0 56.70 62.70 1 82.4 7.3 1 X TPSMA6L54A REA 54.0 60.00 66.30 1 87.1 6.9 1 X TPSMA6L58A RGA 58.0 64.40 71.20 1 93.6 6.5 1 X TPSMA6L60A RKA 60.0 66.70 73.70 1 96.8 6.2 1 X TPSMA6L64A RMA 64.0 71.10 78.60 1 103.0 5.9 1 X TPSMA6L70A RPA 70.0 77.80 86.00 1 113.0 5.3 1 X TPSMA6L75A RRA 75.0 83.30 92.10 1 121.0 5.0 1 X TPSMA6L78A RTA 78.0 86.70 95.80 1 126.0 4.8 1 X TPSMA6L85A RVA 85.0 94.40 104.00 1 137.0 4.4 1 X 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.12/29/20