LSP08-RTS

LSP08 Transient load testing for power management devices is critical to ensuring data integrity at the lowest possible power LoadSlammer Pro 08 consumption. Analog and Digital DC-DC controllers have long been proven to Used by be non-linear in behavior. Large Signal Engineers and Technicians validation of power supply performance is critical to get an understanding of system To performance. Evaluate, Characterize, and Validate The LoadSlammer Pro family allows the testing of power supplies with one development suite, tests and results can be shared with engineers across multiple DC-DC POWER SUPPLY geographies allowing for much greater collaboration than previously. Key Features CPU/ GPU/ FPGA/ 16A DC Pulse Loading, 10mA steps ASIC/ ASSP 1A/us + Slew Rate Programmable Slew Rate 10W Continuous Power Dissapation SYSTEMS Integrated 4D testing, frequency, duty cycle, and current Validated connector system enables fast evaluation of multiple boards The LSP08 combined with the LoadSlammer GUI and Adaptor offerings OCP retry and thermal testing enable preconfigured tests which are Interposer and Adaptor compatible easily adjusted, saved and shared with key stakeholders. Key Takeaway: Automated, exhaustive testing allows for fast and comprehensive testing of your power supplies. LoadSlammer.com 3901 SE Naef Rd. Portland, OR 97267 USA support loadslammer.com 1-503-866-76663DSweep Transient Sweeping PASS/ FAIL Bars KEY SPECIFICATIONS Min Typ. Max Unit Parameter Timing Characteristics Rise Time 50 10 uS On Time Range 7.5 100m Sec Off Time Range 7.5 10 Sec Load Characteristics Current Range 0.5 20 A Current Resolution 10 mA Current Output Accuracy 5 % Input Voltage Rating 0.6 2.0 V Current Sense Output Conversion Ratio 10 A/V Max Current single device 20 A Current Readout Accuracy 5 % Sampling System Sampling Rate 10 MSPS Bandwidth 5 MHz Capture Depth 24 kPoints Power Dissipation Characteristics Continuous Power Dissipation 10 W Instantaneous Power Dissipation 100 W Device Connection DUT Connector Preferred Samtec HSEC8-130-01-L-DV-A-WT-K-TR Surface Mount Samtec HSEC8-130-01-L-DV-K-TR Only Keepout Drawing