PA18SO1-08H-3 Logical Systems

PAxxSO1-08(H)-s Data Sheet 14-28 pin SO socket/14-28 pin DIP 0.3 or 0.6 plug Supported Device/Footprints Adapter Construction This adapter accepts various pin count SO packages with a body The adapter is made up of 2 sub-assemblies. They assemble via width of 0.3 and lead pitch of 0.050. The adapter DIP plug has connectors making the adapter modular. This way the sub- the same pin count as the SO package. The DIP plug span is assemblies can be replaced easily 0.3 or 0.6. When disassembling the adapter take care not to bend the pins. When reassembling the adapter note the pin 1 indicators to align Device Dimensions the parts correctly. This socket can accept devices of the following dimensions: The following chart shows the various socket and board part numbers that make up these adapters. Adapter Socket Board DIP Plug PA14SO1-08H-3 14(28H)SD-08 28SO08-14-3 0.3 PA14SO1-08H-6 14(28H)SD-08 28SO08-14-6 0.6 PA16SO1-08H-3 16(28H)SD-08 28SO08-16-3 0.3 PA16SO1-08H-6 16(28H)SD-08 28SO08-16-6 0.6 PA18SO1-08H-3 18(28H)SD-08 28SO08-18-3 0.3 PA18SO1-08H-6 18(28H)SD-08 28SO08-18-6 0.6 PA20SO1-08H-3 20(28H)SD-08 28SO08-20-3 0.3 Body mm (inches) Knee mm (inches) PA20SO1-08H-6 20(28H)SD-08 28SO08-20-6 0.6 PA24SO1-08H-3 24(28H)SD-08 28SO08-24-3 0.3 min. typ. max. min. typ. max. PA24SO1-08H-6 24(28H)SD-08 28SO08-24-6 0.6 7.4 7.8 7.9 n/a 9.3 9.4 PA28SO1-08-3 28SD-08 28SO08-3 0.3 (0.291) (0.307) (0.311) (0.366) (0.370) PA28SO1-08-6 28SD-08 28SO08-6 0.6 Tip mm (inches) Body Length Lead The board is Rev F. Pitch min. typ. max. n/a 1.27 Test Socket 10.0 11.6 n/a LSC Style Mfgr/Pn (0.394) (0.457) xx(28)SD-08 Lidded ZIF Enplas FP-xx(28H)-1.27-08 28SD-08 Lidded ZIF Enplas FP-28-1.27-08 Adapter Dimensions The xx(28)SD-08 sockets are depopulated from 28 pins to fit the various devices. The sockets are removable so that they may be replaced easily. They are depopulated at the Pin 1 end. If you remove the socket be sure to replace it with the hinge at the Pin 1 end. These sockets have divider fingers between the contacts. A device with fewer pins can be properly inserted in a socket with more pins. The 28 pin adapter can be used for lower pincount devices. This feature offers a cost and adapter inventory saving for those that have the time for more careful device handling. Wiring Wiring is 1 to 1. Pin 1 of the SO device is wired to pin 1 of the DIP plug. Pin 2 to pin 2 and so on around the adapter. Logical Systems Corporation PAxxSO1-08(H)-s Data Sheet Doc: SO108-B.DOC PO Box 6184, Syracuse, NY 13217-6184 USA Rev 6/02/00 Tel (315) 478-0722, FAX (315) 479-6753 SY S T E M S Page 1 of 1 www.logicalsys.com, Email: info logicalsys.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for logical systems manufacturer: Other Similar products are found below : PA17C42-QD-03 PA18SO1-08H-6 PA40-44-P64-DP-PP PA44-PZP PADSO-0803-D310-08/2 PA-SOD6SM18-32 PA-SSD6SM18-28 PA16C64-QD-16 PA28SS-OT-6 PA-QLD6SM18-32F-88 PA-SSD6SM18-40 PA8SO1-03-6 PA14SO1-03-3 PA280-44 PA44QF03-44QF PA51-44 PA32-28 PA-SOF-D420-28/6 PA18SO1-08H-3 PA40-44-P64-DP PA8SO1-2006-6 PA-DSO-1803Z-D420-18/2 PA-QSD3SM18-16 PA-DSO-2803-D420-28/2 PA-SSD3SM18-18 PA14SO1-03-6 PA20SS-OT-3 PA32-32Z PA44QL8-1D PA-SSD3SM18-28 PA32-32 PA- QSD3SM18-20 PA44-40-P64 PA32-28Z PA-SOF-D420-18/6 PA-SOD3SM18-18 PA8SO1-03-3 PA-MSD3SM18-10 PA-SOD3SM18-28 PA-SSD3SM18-14 PA-SSD3SM18-16 PA-MSD3SM18-08 PA-SSD3SM18-08 PA-SSD3SM18-20 PA-SOD3SM18-16 PA-SOD3SM18-08