CK1057 Lorlin

CK ROTARY SWITCH CK ROTARY SWITCH ELECTRICAL & MECHANICAL SPECIFICATION Switch Rating: 1A 24V ac/dc Life: >10,000 Cycles Proof Voltage: 1,500V ac (Initial) Operating Torque (nominal): Standard 8.6 1 cNm Insulation Resistance: >999 M at 500V dc (Initial) Light Action 3.5 0.5 cNm Contact Resistance <20 m (Initial) End Stop Torque (nominal): 0.80 Nm Contact/Terminal Material: Brass CZ108 Ag Plated Moulding Material: Polyamide 6.6 G.F Operating Temperature: -30C to +85C FEATURES Single wafer switch Solder or PCB terminals Shorting (make before break 30 indexing only) or non-shorting (break before make) Maximum 12 positions Gold flashed or gold plated terminals/contacts available Moulded stop or adjustable stops to Up to 4 poles per switch restrict number of positions Continuous rotation also available Spindles with special flats, slots or knurls Standard 30 indexing, 60 and 90 available Rear drive versions Made in UK Moulded 27.5mm No bush versions UL-V0 rated material available diameter IMPORTANT Wafers flats and slots shown as viewed from the front of the switch in the furthest anti- clockwise position ORDERING CODE FOR NON-STANDARD SWITCHES Nb. There is also a specification drawing sheet at the end