PART NUMBER SML-LX0805UPGC-TR REV F REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N 10862. 05.09.02 B E.C.N 10967. 03.14.03 CATHODE C E.C.N 11248. 08.09.05 MARK D E.C.N 10BRDR. & REDRAWN / 11731. 06.20.11 POLARITY E ECN-Lumex201700068 09.11.17 F ECN-Lumex202100004 02.05.21 2 1 2 1 ELECTRO-OPTICAL CHARACTERISTIC TA=25 2.0 PARAMETER MIN TYP MAX UNITS TEST COND 0.079 PEAK WAVELENGTH - 518 - nm If=20mA FORWARD VOLTAGE - 3.3 3.7 Vf If=20mA REVERSE CURRENT - - 50 uA Vr=5V LUMINOUS INTENSITY - 225 - mcd If=20mA VIEWING ANGLE - 140 - 2x theta1/2 - 1.4 0.055 EMITTED COLOR GREEN EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 RECOMMENDED SOLDER PAD LAYOUT PARAMETER MAX UNITS PEAK FORWARD CURRENT* 100 mA 0.6 0.6 FORWARD CURRENT 25 mA 0.024 0.024 REVERSE VOLTAGE 5 V POWER DISIPATION 95 mW STORAGE TEMPERATURE -40 TO +90 OPERATING TEMPERATURE -40 TO +85 2 1 *Duty 1/10 1KHz 1.8 0.071 MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2(L)*1.25(W)*1(H)mm, SURFACE MOUNT TOP VIEW LED 518nm, InGaN GREEN, WATER CLEAR LENS, TAPE & REEL DATE 2017.09.11 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.0 0.039 0.46 0.018 1.25 0.049 1.25 0.049PART NUMBER SML-LX0805UPGC-TR REV F PROFILE CARRIER TAPE DIMENSION 260 C MAX. ABOVE 255 C 10S. MAX. 1.55 0.1 2 0.1 4 0.1 0.25 0.1 30S MAX. CATHODE A 3 C/S MAX. 6 C/S MAX. B B PRE-HEATING 150~200 C ABOVE 217 C A 60~120 SEC. 60~150 SEC. MAX. 1.25 0.1 ANODE 4 0.1 SECTION A-A 1.40 0.1 TIME NOTE SECTION B-B 1. 3000 pcs/reel +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2(L)*1.25(W)*1(H)mm, SURFACE MOUNT TOP VIEW LED 518nm, InGaN GREEN, WATER CLEAR LENS, TAPE & REEL DATE 2017.09.11 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.1 1.75 0.1 8.0 0.3 2.20 0.1