PART NUMBER SML-LX0805USBC-TR REV G REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10862 05.09.02 CATHODE B E.C.N. 10967 03.14.03 MARK C E.C.N. 11148 01.17.05 D E.C.N. 11508 03.06.09 E E.C.N. 10BRDR & REDRAWN 05.07.12 POLARITY F ECN-Lumex201800059 07.10.17 2 1 G ECN-Lumex202100001 02.05.21 2 1 2.00 0.079 ELECTRO-OPTICAL CHARACTERISTIC TA=25 PARAMETER MIN TYP MAX UNITS TEST COND PEAK WAVELENGTH - 468 - nm If=20mA FORWARD VOLTAGE - 3.3 3.7 Vf If=20mA 1.40 REVERSE VOLTAGE - - 50 uA VR=5V 0.055 LUMINOUS INTENSITY - 72 - mcd If=20mA VIEWING ANGLE - 140 - 2x theta1/2 - EMITTED COLOR BLUE EPOXY LENS FINISH WATER CLEAR RECOMMENDED SOLDER PAD LAYOUT ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS 2- 0.6 PEAK FORWARD CURRENT* 40 mA 0.024 FORWARD CURRENT 20 mA REVERSE VOLTAGE 5 V POWER DISSIPATION 75 mW STORAGE TEMPERATURE -40 TO +90 2 1 OPERATING TEMPERATURE -40 TO +85 *Duty 1/10 1KHz 1.8 0.071 MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2(L)*1.25(W)*1(H)mm, SURFACE MOUNT TOP VIEW LED, 468nm BLUE RED, WATER CLEAR LENS, TAPE & REEL DATE 2021.02.05 DRAWN BYE.E. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.000 1.25 0.039 0.049 0.460 0.018 1.25 0.049PART NUMBER SML-LX0805USBC-TR REV G PROFILE CARRIER TAPE DIMENSION 260 C MAX. ABOVE 255 C 10S. MAX. 1.55 0.1 2 0.1 4 0.1 0.25 0.1 30S MAX. CATHODE A 3 C/S MAX. 6 C/S MAX. B B PRE-HEATING 150~200 C ABOVE 217 C A ANODE 60~120 SEC. 60~150 SEC. MAX. 1.25 0.1 4 0.1 SECTION A-A 1.40 0.1 TIME SECTION B-B NOTE 1. 3000 pcs/reel +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 2(L)*1.25(W)*1(H)mm, SURFACE MOUNT TOP VIEW LED, 468nm BLUE RED, WATER CLEAR LENS, TAPE & REEL DATE 2021.02.05 DRAWN BYE.E. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.1 1.75 0.1 8.0 0.3 2.20 0.1