PART NUMBER SML-LX1206IC-TR REV L REV E.C.N. NUMBER AND REVISION COMMENTS DATE A ADDED TAPE DIRECTION AND POLARITY. 11.01.95 B E.C.N. 10404. 12.18.97 CATHODE C E.C.N. 10644. & REDRAWN IN 3D. 07.18.00 MARK D E.C.N. 10814. 12.03.01 E E.C.N. 10967. 03.14.03 F E.C.N. 11148. 01.20.05 G E.C.N. 11466. 01.07.05 H E.C.N. 11644. 07.19.10 I E.C.N. 10BRDR. & REDRAWN. 04.20.11 J E.C.N. 11829. 08.07.12 POLARITY K ECN-Lumex201700131 12.25.17 L ECN-Lumex202000001 01.07.20 3.200 0.126 ELECTRO-OPTICAL CHARACTERISTIC TA=25 2 1 PARAMETER MIN TYP MAX UNITS TEST COND PEAK WAVELENGTH - 640 - nm If=20mA FORWARD VOLTAGE - 2.0 2.4 Vf If=20mA REVERSE CURRENT - - 10 uA VR=5V 2.00 0.079 LUMINOUS INTENSITY - 9 - mcd If=20mA VIEWING ANGLE - 130 - 2x theta1/2 - EMITTED COLOR RED EPOXY LENS FINISH WATER CLEAR RECOMMENDED SOLDER PAD LAYOUT ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 60 mA 2- 1.000 0.039 FORWARD CURRENT 30 mA REVERSE VOLTAGE 5 V POWER DISSIPATION 100 mW STORAGE TEMPERATURE -40 TO +90 OPERATING TEMPERATURE -40 TO +85 2 1 SOLDERING TEMPERATURE 3 SEC. MAX 260 *t<10us 2.600 0.102 MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. DATE 2017.12.25 DRAWN BYC.C. 3.2(L)*1.5(W)*1.0(H)mm, PCB SURFACE MOUNT TOP VIEW LED, 640nm RED, WATER CLEAR LENS, TAPE & REEL. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.500 0.059 1.000 0.039 0.460 0.018 1.500 0.059 2- 1.500 0.059PART NUMBER SML-LX1206IC-TR REV L PROFILE CARRIER TAPE DIMENSION 260 C MAX. 2 0.1 4 0.1 ABOVE 255 C 10S. MAX. 1.50 0.1 0.25 0.1 30S MAX. A 2 3 C/S MAX. 6 C/S MAX. PRE-HEATING B B 150~200 C ABOVE 217 C 60~120 SEC. 60~150 SEC. 1 A 4 0.1 1.15 0.1 SECTION A-A TIME 1.75 0.1 SECTION B-B +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3.2(L)*1.5(W)*1.0(H)mm, PCB SURFACE MOUNT TOP VIEW LED, 640nm RED, WATER CLEAR LENS, TAPE & REEL. DATE 2017.12.25 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.1 1.75 0.1 8.0 0.1 3.40 0.1