PART NUMBER SML-LX23UWC-TR REV F REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10898. & 10BRDR. 08.07.02 2.70 0.106 B E.C.N. 10967. 03.14.03 C E.C.N. 11148. 02.08.05 2.50 0.098 D E.C.N. 11603. 12.15.09 POLARITY E E.C.N. 10BRDR & REDRAWN. 03.28.11 F ECN-Lumex2017000104 11.07.17 ELECTRO-OPTICAL CHARACTERISTIC TA=25 2 1 PARAMETER MIN TYP MAX UNITS TEST COND X - 0.31 - COROMATICITY - If=20mA COORDINATES Y - 0.31 - FORWARD VOLTAGE - 3.3 4.0 Vf If=20mA CATHODE REVERSE VOLTAGE - - 50 uA VR=5V 3.00 0.118 MARK AXIAL INTENSITY - 600 - mcd If=20mA VIEWING ANGLE - 120 - 2x theta1/2 - EMITTED COLOR WHITE EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 150 mA RECOMMENDED SOLDER PAD LAYOUT FORWARD CURRENT 30 mA REVERSE VOLTAGE 5 V POWER DISSIPATION 120 mW 0.75 0.030 2- 1.4 0.055 STORAGE TEMPERATURE -40 TO +85 OPERATING TEMPERATURE -40 TO +85 *t<10us. MOISTURE SENSITIVE DEVICE NOTE: PER JEDEC LEVEL 3 STANDARDS 1. RoHS COMPLIANT. 1.40 0.055 2. PACKAGE : 2000 PCS/REEL. 2 1 STATIC DEVICE FOLLOW PROPER E.S.D. HANDLING PROCEDURES WHEN WORKING WITH THIS PART +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3(L)*2(W)*1.3(H)mm, SURFACE MOUNT WITH REFLECTOR, WATER CLEAR LENS, TAPE & REEL DATE 2017.11.07 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.30 0.051 1.40 0.055 2.00 0.079 0.30 0.012 1.50 0.059 0.65 0.026 2- 1.50 0.059PART NUMBER SML-LX23UWC-TR REV F PROFILE CARRIER TAPE DIMENSION 260 C MAX. ABOVE 255 C 10S. MAX. 2 0.1 1.55 0.1 0.25 0.1 4 0.1 30S MAX. CATHODE A 3 C/S MAX. 6 C/S MAX. PRE-HEATING B B 150~200 C ABOVE 217 C ANODE 60~120 SEC. 60~150 SEC. MAX. A 1.65 0.1 1.00 4 0.1 25 C SECTION A-A TIME 2.25 0.1 SECTION B-B +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3(L)*2(W)*1.3(H)mm, SURFACE MOUNT WITH REFLECTOR, WATER CLEAR LENS, TAPE & REEL DATE 2017.11.07 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY E.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.1 1.75 0.1 8.0 0.3 3.30 0.1