PART NUMBER SML-LXIL0603SYC-TR REV -- CATHODE MARK ELECTRO-OPTICAL CHARACTERISTIC TA=25 PARAMETER MIN TYP MAX UNITS TEST COND POLARITY PEAK WAVELENGTH - 585 - nm If=20mA FORWARD VOLTAGE - 2.1 2.5 Vf If=20mA REVERSE CURRENT - - 50 uA VR=5V 1.64 0.065 2 1 LUMINOUS INTENSITY - 1350 - mcd If=20mA VIEWING ANGLE - 75 - 2x theta1/2 - EMITTED COLOR YELLOW 0.79 0.031 EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS PEAK FORWARD CURRENT* 100 mA FORWARD CURRENT 25 mA RECOMMENDED SOLDER PAD LAYOUT REVERSE VOLTAGE 5 V POWER DISSIPATION 62.5 mW STORAGE TEMPERATURE -40 TO +90 2- 0.450 OPERATING TEMPERATURE -40 TO +85 SOLDERING TEMPERATURE** 3 SEC. MAX. 260 *t<10us **2.0mm FROM BODY 2 1 NOTE: 1. RoHS COMPLIANT. 2. COMPLIANCE WITH EU REACH. 1.84 3. COMPLIANCE HALOGEN FREE. (Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). 4. PACKAGE: 3000 PCS/REEL. MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 2 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 1.64(L)*0.84(W)*1.15(H)mm, TOP VIEW, SURFACE MOUNT LED, 585nm YELLOW LED, WATER CLEAR LENS. DATE 2018.10.09 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 0.50 0.020 1.15 0.045 0.84 0.033 2- 0.900 PART NUMBER SML-LXIL0603SYC-TR REV -- PROFILE CARRIER TAPE DIMENSION 2 0.05 260 C MAX. +0.1 ABOVE 255 C 4 0.1 1.50 0.0 0.25 0.02 10S. MAX. 30S MAX. A 3 C/S MAX. 2 6 C/S MAX. B PRE-HEATING B 150~200 C ABOVE 217 C 60~120 SEC. 60~150 SEC. A 1 1.30 0.05 4 0.1 SECTION A-A TIME 0.92 0.1 SECTION B-B +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 1.64(L)*0.84(W)*1.15(H)mm, TOP VIEW, SURFACE MOUNT LED, 585nm YELLOW LED, WATER CLEAR LENS. DATE 2018.10.09 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 3.5 0.5 1.75 0.1 +0.3 8.0 -0.1 1.78 0.05