PART NUMBER SML-LXL1209SIC-TR REV D REV E.C.N. NUMBER AND REVISION COMMENTS DATE CATHODE MARK A E.C.N. 10967. 03.14.03 B E.C.N. 11148. 12.03.04 C E.C.N. 11508. 05.27.10 D ECN-Lumex201700103 11.07.17 POLARITY ELECTRO-OPTICAL CHARACTERISTIC TA=25 1.72 0.068 PARAMETER MIN TYP MAX UNITS TEST COND 2 1 PEAK WAVELENGTH - 632 - nm If=20mA FORWARD VOLTAGE 1.7 2.0 2.4 Vf If=20mA C 3.20 L REVERSE CURRENT - - 10 uA VR=5V 0.126 LUMINOUS INTENSITY - 415 - mcd If=20mA VIEWING ANGLE - 20 - 2x theta1/2 If=20mA 2.20 EMITTED COLOR SUPER INTENSITY RED 0.087 EPOXY LENS FINISH WATER CLEAR ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS RECOMMENDED SOLDER PAD LAYOUT PEAK FORWARD CURRENT* 60 mA 2.80 0.10 FORWARD CURRENT 25 mA 0.110 0.004 REVERSE VOLTAGE 5 V POWER DISSIPATION 60 mW STORAGE TEMPERATURE -40 TO +85 OPERATING TEMPERATURE -40 TO +90 SOLERING TEMPERATURE 3 SECS MAX 260 *Duty 1/10 1KHz 2 1 NOTE: 0.80 0.20 1.RoHS COMPLIANT. 0.031 0.008 2.PACKAGE :1000PCS/REEL MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 3 STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3.2(L)*2.4(W)*2.6(H)mm, SML, 632nm SUPER INTENSITY RED LED, WATER CLEAR LENS, TAPE AND REEL. DATE 2017.11.06 DRAWN BYK.Y. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 0.60 0.10 0.50 0.10 C 2.40 L 0.024 0.004 0.020 0.004 0.094 2.60 0.102 2.60 0.20 0.102 0.008PART NUMBER SML-LXL1209SIC-TR REV D REV E.C.N. NUMBER AND REVISION COMMENTS DATE A E.C.N. 10967. 03.14.03 B E.C.N. 11148. 12.03.04 C E.C.N. 11508. 05.27.10 D ECN-Lumex201700103 11.07.17 PROFILE CARRIER TAPE DIMENSION +0.25 4.00 2.00 0.05 1.50 0.00 0.157 0.079 0.002 +0.010 0.059 0.000 260 C MAX. 0.30 0.02 ABOVE 255 C 10S. MAX. A 0.012 0.001 30S MAX. 2 3 C/S MAX. 6 C/S MAX. PRE-HEATING 150~200 C ABOVE 217 C 1 2.75 60~120 SEC. 60~150 SEC. 4.00 2.60 0.108 0.157 0.102 A SECTIOA-A TIME +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X=0.5 (0.020), X.XX=0.25 ( 0.010), X.XXX= 0.127 (0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 (0.030). MIN= MAX.= -DECIMAL PRECISION -0.00 425 N. GARY AVE. 3.2(L)*2.4(W)*2.6(H)mm, SML, 632nm SUPER INTENSITY RED LED, WATER CLEAR LENS, TAPE AND REEL. DATE 2017.11.06 DRAWN BYK.Y. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY E.C. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY G.Y. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 5.50 0.05 1.75 0.217 0.002 0.069 12.00 0.30 0.472 0.012 3.40 0.134