PART NUMBER SML-LXT0805IW-TR REV G DATE REV E.C.N. NUMBER AND REVISION COMMENTS A E.C.N 10567. 12.08.99 B E.C.N 10695. 01.08.01 COTHODE C E.C.N 10814. 02.25.02 MARK D E.C.N 10967. 03.22.04 POLARITY E E.C.N 11148. 12.03.04 F E.C.N 11508. 09.29.09 06.02.17 G ECN-Lumex201700020 ANODE COTHODE ELECTRO-OPTICAL CHARACTERISTIC TA=25 2 0.1 PARAMETER MIN TYP MAX UNITS TEST COND 0.079 0.004 PEAK WAVELENGHT - 640 - nm If=20mA DOMINANT WAVELENGHT - 628 - nm If=20mA FORWARD VOLTAGE - 2.1 2.6 Vf If=20mA REVERSE VOLTAGE - - 5 Vr Ir=10uA 1.4 0.1 0.055 0.004 LUMINOUS INTENSITY - 7.15 - mcd If=20mA VIEWING ANGLE - 130 - 2x theta1/2 - EMITTED COLOR RED EPOXY LENS FINISH MILKY WHITE DIFFUSED RECOMMENDED SOLDER PAD LAYOUT ABSOLUTE MAXIMUM RATINGS TA=25 PARAMETER MAX UNITS 0.9 0.9 COTHODE 0.035 0.035 PEAK FORWARD CURRENT* 40 mA SIDE FORWARD CURRENT 20 mA POWER DISIPATION 48 mW STORAGE TEMPERATURE -40 TO +100 OPERATING TEMPERATURE -40 TO +85 *t<10us 1.0 0.5 0.1 0.039 0.020 0.004 CAUTIONMOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 2a STANDARDS +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION MILKY WHITE DIFFUSED 425 N. GARY AVE. 2(L)*1.3(W)*0.8(H)mm, SURFACE MOUNT TOP VIEW LED, GaAsP RED, , TAPE & REEL DATE 2017.06.02 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 1 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY R.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH 1.3 0.1 0.8 0.1 1.1 0.1 0.051 0.004 0.031 0.004 0.043 0.004 1.1 0.043PART NUMBER SML-LXT0805IW-TR REV G FORWARD VOLTAGE s. FORWARD CURRENT CARRIER TAPE DIMENSION 2 0.1 4 0.1 1.5 0.1 0.059 0.004 0.25 0.1 A CATHODE B B PROFILE A 4 0.1 0.95 0.1 260 C MAX. ANODE 10S. MAX. SECTION A-A 4 C/S MAX. 1.45 0.1 6 C/S MAX. 200 C SECTION B-B 180 C PRE-HEATING 180~200 C ABOVE 220 C 120 SEC. MAX. 60 SEC. MAX. 4 C/S MAX. TIME +DECIMAL PRECISION +0.00 *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X= 1 ( 0.039), X.X= 0.5 ( 0.020), X.XX= 0.25 ( 0.010), X.XXX= 0.127 ( 0.005). LEAD SIZE= 0.05 ( 0.002), LEAD LENGTH= 0.75 ( 0.030). MIN= MAX.= -0.00 -DECIMAL PRECISION MILKY WHITE DIFFUSED 425 N. GARY AVE. 2(L)*1.3(W)*0.8(H)mm, SURFACE MOUNT TOP VIEW LED, GaAsP RED, , TAPE & REEL DATE 2017.06.02 DRAWN BYC.C. CAROL STREAM, IL 60188 PAGE 2 OF 2 CHKD BY G.Y. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** PHONE800-278-5666 CONFIDENTIAL INFORMATION SCALE : NTF APRVD BY R.C. FAX630-315-2150 THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL WEBWWW.LUMEX.COM KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. Pb UNIT mm INCH TEMPERATURE 1.75 0.1 3.5 0.1 8.0 0.3 2.30 0.1