X-On Electronics has gained recognition as a prominent supplier of DS-327-PIN Signal Conditioning across the USA, India, Europe, Australia, and various other global locations. DS-327-PIN Signal Conditioning are a product manufactured by MACOM. We provide cost-effective solutions for Signal Conditioning, ensuring timely deliveries around the world.
We are delighted to provide the DS-327-PIN from our Signal Conditioning category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the DS-327-PIN and other electronic components in the Signal Conditioning category and beyond.
DS-327 Flatpack Two-Way Power Divider Rev. V3 5-1000 MHz Features Functional Schematic n Broadband, IN Phase Divider n Low Loss: 0.3 dB Typical n Amplitude Balance: 0.05 dB Typical n Impedance: 50 Ohms Nominal n Maximum Power Rating or Input Power: 1 Watt Max. n Internal Load Dissipation: 0.05 Watts Max. n MIL-STD-883 Screening Available Description A Power Divider is ideally a loss less reciprocal de- vice which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. 3 Pin Configuration Pin No. Function Pin No. Function GND 1 11 2 GND 12 GND GND GND 3 13 1,2 Ordering Information Output C Output D 4 14 Part Number Package DS-327 PIN FP-2 3. MACOM recommends connecting unused package pins to 1. Reference Application Note M513 for reel size information. ground. 2. All sample boards include x loose parts. 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: DS-327 Flatpack Two-Way Power Divider Rev. V3 5-1000 MHz 1 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 500 MHz dB 0.5 500 - 1000 MHz dB 1.0 Isolation 5 - 500 MHz dB 25 500 - 1000 MHz dB 20 Amplitude Balance 5 - 1000 MHz dB 0.2 Phase Balance 5 - 500 MHz 2 500 - 1000 MHz 3 VSWR Input 10 - 500 MHz Ratio 1.3:1 Output 5 - 1000 MHz Ratio 1.5:1 1. All specifications apply with 50 ohm source and load impedance. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: