M1H Double-Balanced Mixer Rev. V2 Features LO and RF: 1.8 to 6.2 GHz IF: DC to 2 GHZ LO Drive +7 dBm (nominal) High Isolation 35 dB (Typ.) 1 Guaranteed Specifications Characteristics Test Conditions Units Min Typ. Max. SSB Conversion Loss fL & fR 1.8 to 4.2 GHz, fI 0.01 to 1 GHz 7.0 dB 8.5 dB And fL & fR 1.8 to 4.2 GHz, fI 0.01 to 2 GHz dB 8.5 dB 9.5 dB SSB Noise Figure fL & fR 1.8 to 6.2 GHz, fI 0.01 to 2 GHz 9.0 dB 10.0 dB fL at R, fL 1.8 to 4.2 GHz 25 dB 40 dB fL at I, fL 1.8 to 4.2 GHz 15 dB 25 dB Isolation dB fL at R, fL 4.2 to 6.2 GHz 18 dB 25 dB fL at I, fL 4.2 to 6.2 GHz 15 dB 20 dB fR = 0 dBm Conversion Compression dB 1.0 dB fL at +7 dB Notes: 1. Measure in a 50-Ohm system with nominal LO drive and downconverter application only, unless otherwise specified. The I-Port frequency range extends to DC for phase detection, pulse modulation, or attenuator applications, I-Port VSWR degrades from a 50-Ohm system at low IF frequencies. Absolute Maximum Ratings o o Storage Temperature -65 C to +100 C o o Operating Temperature -54 C to +100 C Peak RF Input Power +17 dBm o Peak Input Current at 25 C 50 mA DC Weight 31 gram (1.1 oz) max. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: M1H Double-Balanced Mixer Rev. V2 o Typical Performance Curves at 25 C 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: