M80 / M80C Double-Balanced Mixer Rev. V2 Features Product Image LO 4 TO 18 GHz RF 6 TO 18 GHz IF DC TO 3000 MHz LO DRIVE +7 dBm (nominal) WIDE BANDWIDTH LOW NOISE FIGURE Description The M80 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector and/or bi-phase modulator since the IF port is DC coupled to the diodes. The use of high temperature solder and welded assembly processes used internally makes it ideal for use in manual, semi-automated assembly. Environmental screening available to MIL-STD-883, MIL-STD-202, or Ordering Information Part Number Package M80 Minpac M80C SMA Connectorized Electrical Specifications: Z = 50 Lo = +7 dBm (Downconverter 0 Typical Guaranteed Parameter Test Conditions Units +25C -54 to +85C SSB Conversion Loss fR = 6 to 16 GHz, fL = 5 to 17 GHz, fI = 30 to 1000 MHz dB 6.0 8.0 8.5 (max) & SSB Noise fR = 6 to 18 GHz, fL = 4 to 18 GHz, fI = 1000 to 3000 MHz dB 7.0 9.0 9.5 Figure (max) fL = 4 to 14 GHz dB 36 23 21 Isolation, L to R (min) fL = 14 to 18 GHz dB 32 18 16 fL = 4 to 9 GHz dB 28 16 14 Isolation, L to I (min) fL = 9 to 18 GHz dB 38 23 21 1 dB Conversion Comp. fL = +7 dBm dBm +3 fR1=13 GHz at 10 dBm,fR2=13.01GHz at 10 dBm, Input IP3 fL = 14 GHz at = +7 dBm dBm +10 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: M80 / M80C Double-Balanced Mixer Rev. V2 Typical Performance Curves 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: