MAAM-011220 75 , High Linearity, Low Noise, CATV Amplifier Rev. V1 45 - 1218 MHz Features Functional Schematic Single Stage, Single Ended 8 V, 130 mA or 5 V, 110 mA Operation 18 dB Flat Gain Low Noise Low Distortion Performance Lead-Free SOT-89 Plastic Package Halogen-Free Green Mold Compound RoHS* Compliant Description The MAAM-011220 is an RF amplifier assembled in a SOT-89 plastic package. This amplifier provides 18 dB of ultra flat gain while biased at either 8 or 5 volts. The amplifier provides excellent linearity. The MAAM-011220 provides high gain, low noise and low distortion making it ideally suited for 75 Pin Configuration infrastructure applications. The MAAM-011220 is fabricated using GaAs pHEMT technology. 1 RF RF Input IN 2 GND Ground 3 RF RF Output / Drain Supply OUT 1,2 Ordering Information MAAM-011220-TR1000 1000 piece reel MAAM-011220-TR3000 3000 piece reel MAAM-011220-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAM-011220 75 , High Linearity, Low Noise, CATV Amplifier Rev. V1 45 - 1218 MHz Electrical Specifications: Freq. = 45 - 1218 MHz, T = 25C, V = 8 V, Z = 75 A DD 0 Parameter Test Conditions Units Min. Typ. Max. Gain 1218 MHz dB 18 18.5 20 Tilt 45 - 1218 MHz dB 0.5 Reverse Isolation dB 21.5 Input Return Loss dB 20 Output Return Loss dB 24 50 - 100 MHz 2.6 4 Noise Figure dB 100 - 1218 MHz 2.4 3.1 45 - 1218 MHz, tone spacing 6 MHz, Output IP2 dBm 66 P per tone = -10 dBm OUT 45 - 1218 MHz, tone spacing 6 MHz, Output IP3 dBm 38 P per tone = -10 dBm OUT P1dB dBm 24 79 channels, 0 dB Tilt, 34 dBmV per -73 channel output, QAM to 1000 MHz Composite Triple Beat, CTB dBc -71 132 channels, 15 dBmV per channel input 79 channels, 0 dB Tilt, 34 dBmV per -69 channel output, QAM to 1000 MHz Composite Second Order, CSO dBc -65 132 channels, 15 dBmV per channel input I V = 8 V mA 110 130 145 DD DD 3,4,5,6 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid damage: Max Input Power 12 dBm Static Sensitivity Operating Voltage 10 volts Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged Operating Temperature -40C to +85C by static electricity. Proper ESD control techniques should be used when handling these HBM Class1A Storage Temperature -65C to +150C devices. 3. Exceeding any one or combination of these limits may cause permanent damage to this device. 4. MACOM does not recommend sustained operation near these survivability limits. 6 5. These operating conditions will ensure MTTF > 1 x 10 hours. 6. Junction Temperature (T ) = Case Temperature (T ) + *(V*I) J C JC Typical thermal resistance ( ) = 50.4C/W. JC a) For T = 25C, C T = 67.5C 8 V, 130 mA J b) For T = 85C, C T = 137.5C 8 V, 130 mA J 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: