MAAP-010171
Amplifier, Power, 8 W
Rev. V3
2.5 - 3.5 GHz
Features Functional Schematic
Linear Gain: 27 dB
Saturated Output Power: +39 dBm Pulsed
50 Input / Output Match
Lead-Free 5 mm 20-lead PQFN Package
20 19 18 17 16
Halogen-Free Green Mold Compound
RoHS* Compliant and 260C Reflow Compatible
GND GND
1 15
2 14
Description GND GND
The MAAP-010171 is a 2-stage, 8 W saturated
3 13
RF RF
IN OUT
S-band power amplifier in a 5mm 20 lead PQFN
package, allowing easy assembly. This product is GND 4 12 GND
fully matched to 50 ohms on both the input and
GND 5 11 GND
output. It can be used as a power amplifier stage or
as a driver stage in high power pulsed applications.
10
6 7 8 9
It is ideally suited for Air Traffic Control, Weather,
Military and S-band radar applications.
Each device is 100% RF tested to ensure
performance compliance.
2
Pin Configuration
Pin No. Function Pin No. Function
1 Ground 11 Ground
2 Ground 12 Ground
1
Ordering Information
3 RF 13 RF
IN OUT
Part Number Package
4 Ground 14 Ground
MAAP-010171-TR0500 500 piece reel
5 Ground 15 Ground
6 V 1b 16 V 2a
MAAP-010171-TR1000 1000 piece reel G D
7 V 2b 17 V 2a
G D
MAAP-010171-000SMB Sample Board
8 V 1b 18 V 1a
D D
1. Reference Application Note M513 for reel size information.
9 V 2b 19 V 2a
D G
10 V 2b 20 V 1a
D G
3
21 Paddle
2. MACOM recommends connecting unused package pins to
ground.
3. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
11
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
MAAP-010171
Amplifier, Power, 8 W
Rev. V3
2.5 - 3.5 GHz
Electrical Specifications:
Freq. 2.5 - 3.5 GHz, V = 9 V Pulsed, 100 s Pulse Width, 10% Duty Cycle, Z = 50
DD 0
Parameter Units Min. Typ. Max.
Gain dB 25 27
Input Return Loss dB 10
Output Return Loss dB 10
P dBm 37 39
SAT
Small Signal Current (I ) A 1
DD
Efficiency % 38
4,5
Absolute Maximum Ratings
Parameter Absolute Maximum
Input Power 22 dBm
Handling Procedures
Please observe the following precautions to avoid
Supply Voltage 11 V
damage:
Gate Current 25 mA
Duty Cycle 50 %
Static Sensitivity
Operating Temperature -40C to +85C Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
6,7
Junction Temperature +150C
damaged by static electricity. Proper ESD control
Storage Temperature -55C to +150C
techniques should be used when handling these
class 1A devices.
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. MACOM does not recommend sustained operation near
these survivability limits.
6. Operating at nominal conditions with T 150C will ensure
J
6
MTTF > 1 x 10 hours.
7. Junction Temperature (T ) = T + * (V * I).
J C JC
Typical thermal resistance ( ) = 5.75C/W
JC
22
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: