MADT-011000-TR1000

MADT-011000 Power Detector Rev. V1 5 - 44 GHz Features Functional Schematic Input Power: -15 to +15 dBm GND GND GND GND Dynamic Range: 30 dB DC supply: 4.5 V, 70 A 16 15 14 13 Lead-Free 3 mm 16-Lead QFN Package ESD protected GND 1 12 GND RoHS* Compliant Description GND 2 Matching & Bias 11 GND MADT-011000 is a single-ended, internally-matched power detector with wide input bandwidth and high 3 GND RF 10 IN dynamic range. The circuit consumes 70 A from a 4.5 V supply, while matched detector and reference GND 4 9 GND diodes provide temperature compensation in differential operation. 5 6 7 8 The power detector is housed in a 3 mm 16-lead V V V GND DET DC REF QFN package and is ESD protected for reliability and ease of handling. 3 Pin Configuration MADT-011000 is well suited for power control in microwave radios, test and measurement Pin No. Function equipment, and radar applications. 3 1, 2, 4, 8 - 16 GND MADT-011000 is also available in bare die format. 3 RF IN Refer to datasheet MADT-011000-DIE. 5 V DET 6 V DC 1,2 Ordering Information 7 V REF 4 Part Number Package Paddle 3. MACOM recommends connecting unused package pins to MADT-011000 Bulk ground. 4. The exposed pad centered on the package bottom must be MADT-011000-TR1000 1000 Piece Reel connected to RF, DC and thermal ground. MADT-011000-SB1 Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MADT-011000 Power Detector Rev. V1 5 - 44 GHz 5 Electrical Specifications: Freq. = 5 - 44 GHz, T = +25C, V = 4.5 V, Z = 50 A DC 0 Parameter Test Conditions Units Min. Typ. Max. Input Power dBm -15 +15 Dynamic Range Vref - Vdet > 5 mV dB 30 Vdelta = Vref - Vdet Vdelta mV 5 2200 Input power = -15 to +15 dBm 5 - 10 GHz -11 -9 10 - 12 GHz -11 -9 Return Loss dB -15 -9 12 - 36 GHz -18 -13 36 - 44 GHz Supply Voltage V 4.5 Current Consumption A 60 70 80 5. All specifications refer to CW input signal. 6,7 8,9 Absolute Maximum Ratings Application Circuit Parameter Absolute Maximum 16 15 14 13 Input Power 18 dBm VDC 6 V 1 12 Operating Temperature -40C to +85C 2 11 Storage Temperature -65C to +150C RF IN 3 10 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 4 9 7. MACOM does not recommend sustained operation near these survivability limits. 5 6 7 8 Handling Procedures V DC V V DET REF Please observe the following precautions to avoid 27 k 27 k damage: Static Sensitivity 8. External 27 k resistors are recommended for optimum These electronic devices are sensitive to performance. electrostatic discharge (ESD) and can be damaged 9. Typical Vref = 0.74 V by static electricity. Proper ESD control techniques should be used when handling these Class 1B devices. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: