MAMX-011037-DIE Double-Balanced Mixer Rev. V2 18 - 46 GHz Features Functional Schematic Low Conversion Loss: 6.5 dB High Linearity: 20 dBm IIP3 Wide IF Bandwidth: DC to 20 GHz 1 9 High Isolation Die Size: 1.15 0.97 0.10 mm LO RF RoHS* Compliant 2 8 Description MAMX-011037-DIE is a double-balanced passive diode mixer MMIC. The mixer offers low conversion 3 7 IF loss, high linearity and a wide IF bandwidth. The double-balanced circuit configuration provides excellent port isolation while internal 50-ohm 4 5 6 matching simplifies its application. This mixer is well suited for applications such as test and measurement, microwave radio and radar. MAMX-011037-DIE is also available in a 3 mm QFN Bond-pad Configuration package. Refer to datasheet MAMX-011054. Pad No. Function Pad No. Function 2 2 1 GND 6 GND 2 Ordering Information 2 LO 7 GND 2 Part Number Package 3 GND 8 RF 1 2 2 MAMX-011037-DIE Vacuum Release Gel Pack 4 GND 9 GND 3 MAMX-011037-SB2 Sample Board 5 IF 10 GND 1. Die quantity varies. 2. These pads are internally connected to ground, and they can be left unconnected. 3. The backside of the die must be connected to RF, DC and thermal ground. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 1 11 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAMX-011037-DIE Double-Balanced Mixer Rev. V2 18 - 46 GHz 4 Electrical Specifications : F = 1GHz, P = +15 dBm, T = 25C, Z = 50 IF LO A 0 Parameter Test Conditions Units Min. Typ. Max. LO and RF Frequency GHz 18 46 IF Frequency GHz 0 20 LO Power dBm 15 18 - 24 GHz 6.5 12 Conversion Loss 24 - 40 GHz dB 6.5 10 40 - 46 GHz 6.5 11 Input P1dB dBm 12 Input IP3 P = -10 dBm/tone, f = 1 MHz dBm 20 RF Input IP2 P = -10 dBm/tone, f = 1 MHz dBm 50 RF LO-to-RF Isolation dB 35 18 - 24 GHz 25 37 LO-to-IF Isolation 24 - 40 GHz dB 27 45 40 - 46 GHz 23 44 18 - 24 GHz 10 RF-to-IF Isolation 24 - 40 GHz dB 8 24 40 - 46 GHz 13 27 RF Return Loss RF = 40 GHz dB 5 IF Return Loss IF = 1 GHz dB 15 4. All specifications refer to down-conversion operation, unless otherwise noted. 5,6 Absolute Maximum Ratings Handling Procedures Please observe the following precautions to avoid Parameter Absolute Maximum damage: LO Power 23 dBm Static Sensitivity RF or IF Power 20 dBm These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged 7 Junction Temperature +150C by static electricity. Proper ESD control techniques should be used when handling these HBM Class 1B Operating Temperature -55C to +85C devices. Storage Temperature -65C to +150C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. 7. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 2 22 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: