MAPD-007530-000100

MAPD-007530-000100 Low Cost Two-Way GMIC SMT Power Divider Rev. V2 1700 2000 MHz Features Functional Diagram Small Size and Low Profile Typical Insertion Loss: 0.6 dB Typical Amplitude Balance: 0.2 dB 1 Watt Power Handling Lead-Free SOT-26 Package 100% Matte Tin Plating over Copper Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0014 Description M/A-COMs MAPD-007530-000100 is an IC-based monolithic power divider using M/A-COMs GMIC technology in a low cost SOT-26 plastic package. This 2-way power divider is ideally suited for applica- tions where small size, low insertion loss, superior phase/amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. The MAPD-007530-000100 is fabricated using a passive integrated circuit process. The process fea- tures full-chip passivation for increased performance and reliability. Ordering Information Part Number Package MAPD-007530-000100 Bulk Packaging Pin Configuration MAPD-007530-0001TR 1000 piece reel MAPD-007530-0001TB Sample Test Board Pin No. Function Pin No. Function 1 RF1 (OUT) 4 GND Note: Reference Application Note M513 for reel size information. 2 GND 5 GND 3 RF2 (OUT) 6 RF IN * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAPD-007530-000100 Low Cost Two-Way GMIC SMT Power Divider Rev. V2 1700 2000 MHz 1 Electrical Specifications: T = 25C A Parameter Test Conditions Units Min Typ Max 1700 - 2000 MHz dB 0.6 0.8 Insertion Loss Above 3.0 dB 1700 - 2000 MHz dB 16 20 Isolation VSWR Input 1700 - 2000 MHz Ratio 1.2:1 1.4:1 RF1, RF2 Outputs 1700 - 2000 MHz Ratio 1.1:1 1.3:1 1700 - 2000 MHz dB 0.2 0.4 Amplitude Balance 1700 - 2000 MHz Deg. 1.5 3.0 Phase Balance 1. All specifications apply with a 50-ohm source and load impedance. Recommended PCB Configuration 2,3 Absolute Maximum Ratings .020 Typ. Plated Thru Hole Parameter Absolute Maximum 4 Input Power 1W CW 5 4 6 Operating Temperature -40C to +85C Storage Temperature -65C to +150C 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits056 4. With internal load dissipation of 0.125 W maximum. Handling Procedures 1 2 3 Please observe the following precautions to avoid .022 Typ. damage: .006 .046 Typ. Static Sensitivity GMIC Circuits are sensitive to electrostatic dis- charge (ESD) and can be damaged by static elec- tricity. Proper ESD control techniques should be used when handling these devices 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, India Tel: +91.80.4155721 China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.