MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, Rev. V2 2200 - 2500 MHz Features Functional Block Diagram Small Size and Low Profile Typical Insertion Loss: 1.0 dB Typical Amplitude Balance: 0.1 dB GND 1 Watt Power Handling Lead-Free SOT-25 Package RF IN 100% Matte Tin Plating over Copper 4 5 Halogen-Free Green Mold Compound 260C Reflow Compatible RoHS* Compliant Version of DS52-0007 Description M/A-COMs MAPDCC0010 is an IC-based mono- lithic power divider using M/A-COMs GMIC technol- ogy in a low cost SOT-25 plastic package. This 2- way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typi- 2 1 3 cal applications include handsets, base station RF2 RF1 switching networks and other communication appli- (Out) (Out) cations where size and PCB real estate are at a GND premium. Available in Tape and Reel. The MAPDCC0010 is fabricated using a passive- integrated circuit process. The process features full- chip passivation for increased performance and reli- ability. Ordering Information Pin Configuration Part Number Package Pin No. Function MAPDCC0010 Bulk Packaging 1 RF1 (OUT) MAPDCC0010-TR 1000 piece reel 2 GND MAPDCC0010-TB Sample Test Board 3 RF2 (OUT) 4 GND Note: Reference Application Note M513 for reel size 5 RF IN information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAPDCC0010 Low Cost Two-Way GMIC SMT Power Divider, Rev. V2 2200 - 2500 MHz Electrical Specifications: T = 25C, Z = 50 A 0 Parameter Frequency Units Min Typ Max Insertion Loss 2200 - 2500 MHz dB 1.0 1.1 (above 3.0 dB theoretical loss) Isolation 2200 - 2500 MHz dB 15 22 Input VSWR 2200 - 2500 MHz Ratio 1.6:1 1.8:1 Output VSWR 2200 - 2500 MHz Ratio 1.3:1 1.5:1 Amplitude Balance 2200 - 2500 MHz dB 0.1 Phase Balance 2200 - 2500 MHz 2 1,2 Absolute Maximum Ratings Parameter Absolute Maximum 3 Input Power 1 W CW Operating Temperature -40C to +85C Storage Temperature -65C to +150C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause .020 Typ. permanent damage to this device. Plated Thru Hole 2. M/A-COM does not recommend sustained operation near these survivability limits. 4 5 3. With internal load dissipation of 0.125 W maximum056 1 2 3 .022 Typ006 .046 Typ. Handling Procedures Dimensions in inches. Please observe the following precautions to avoid Circuit Material: FR-4, .016 Thick. damage: Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: