MDS-222-PIN

MDS-222 Surface Mount Double-Balanced Mixer, Rev. V4 200 KHz - 200 MHz Features SF-1 Fully Hermetic Package Three Decade Coverage Impedance: 50 Ohms Nominal Maximum Input Power: 400 mW Max, Derated to 85C 3.2 mW/C X Port Current: 50 mA Max. MIL-STD-883 Screening Available Description Transformers convert the LO and RF paths to balanced lines connecting to a medium barrier, Schottky diode ring quad. These transformers help provide excellent isolation between ports. Conversion loss is low. The direct connection of the IF port to the diode quad allows these mixers to be used as phase detectors and bi-phase modulators. Pin Configuration Pin No. Function Pin No. Function 1 GND 3 LO 2 IF 4 RF 1 Electrical Specifications : T = -55C to +85C A Parameter Test Conditions Frequency Units Min Typ Max Frequency Range RF, LO Ports 0.2 - 200 MHz IF Port DC - 200 MHz Conversion Loss 0.2 - 50 MHz dB 6.0 50 - 200 MHz dB 7.5 Isolation LO to RF 0.2 - 50 MHz dB 35 50 - 200 MHz dB 30 LO to IF 0.2 - 50 MHz dB 35 50 - 200 MHz dB 25 RF to IF 0.2 - 50 MHz dB 25 50 - 200 MHz dB 20 DC Polarity Negative DC Offset mV <3 2 RF Input 1 dB Compression dBm +2 1 dB Desensitization dBm 0 SSB Noise Figure Within 1 dB of Conversion Loss Max Typical Two-Tone IM with a 10 dBm input, each input, 100 - 200 MHz dB 50 Ratio 25 MHz and 35 MHz IF 200 - 300 MHz dB 36 1. All specifications apply when operated at +7 dBm available LO power with 50 ohm source and load impedance. 2. Measured at 100 MHz. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MDS-222 Surface Mount Double-Balanced Mixer, Rev. V4 200 KHz - 200 MHz Typical Performance Curves Bottom View of SF-1 4X .016 .002 .506 .385 Ref .220 .381 .165 .002 .000 Ordering Information Part Number Package MDS-222 PIN SF-1 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: