205-532-23-38

205 series features Direct replacement for T1 Midget Groove S5.7s Reverse polarity options available Water clear lens Centre contact Anode as standard Low current versions available Warm white LEDs may be used behind coloured lens as a true replacement for a filament lamp Pack Quantity = 20 Pieces specifications Ordering information and typical characteristics (Ta = 25C) Current Luminous Wave Operating Storage Part Voltage De-rating Colour DC Intensity Length Temp. Temp. Number Vac/dc Graphs (mA) (mcd) (nm) (C) (C) 205-501-21-38 Red 12 Vdc 10 600 630 -40 - +80 -40 - +100 D 205-521-21-38 Yellow 12 Vdc 10 600 585 -40 - +80 -40 - +100 D 205-532-21-38 Green 12 Vdc 10 2300 515 -40 - +75 -40 - +100 F 205-930-21-38 Blue 12 Vdc 10 9870 465 -30 - +85 -40 - +100 U 205-997-21-38 White 12 Vdc 10 27000 * See pg.2 -30 - +85 -40 - +100 I 205-993-21-38 Warm White 12 Vdc 10 850 * See pg.2 -30 - +85 -40 - +100 I 205-501-23-38 Red 28 Vdc 8 600 630 -40 - +80 -40 - +100 D 205-521-23-38 Yellow 28 Vdc 8 600 585 -40 - +80 -40 - +100 D 205-532-23-38 Green 28 Vdc 8 2300 515 -40 - +75 -40 - +100 F 205-930-23-38 Blue 28 Vdc 14 9870 465 -30 - +85 -40 - +100 U 205-997-23-38 White 28 Vdc 8 27000 * See pg.2 -30 - +85 -40 - +100 I 205-993-23-38 Warm White 28 Vdc 8 850 * See pg.2 -30 - +85 -40 - +100 I = Voltage for 20mA product is Vf at 20mA, not Vopr - Products must be de-rated according to the de-rating information. Each de-rating graph refers to specific LEDs. Please refer to graphs on page 2. - Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl international limited reserve the right BS EN ISO 9001:2008 to alter without notice the specification or any conditions of supply for product or service. approved manufacturer marl international limited - dsn 205 - version 2014-02-27-173158 page 1 of 5 filament replacement leds30 30 30 205 series technical data 11.5 3.5 Green dot on base of product signifies reverse polarity. Colour dot on LED denotes LED colour. Dimensions in mm (typical) Not to scale Metric Equivalent Max. Power Dissipation Lamp Base Style Series (mm) (mW) T1 Midget Groove S5.7s 205 5 500 997F-C *Typical emission colour White 899F *Typical emission colour Warm White x 0.31 - - - x 0.4255 0.4390 0.4680 0.4519 y 0.32 - - - y 0.4000 0.4310 0.4385 0.4086 Intensities (Iv) and colour shades of white (x,y co-ordinates) may vary between leds within a batch de-rating information Derating Graph D Derating Graph I Derating Graph F 55 55 55 50 50 50 45 45 45 40 40 40 35 35 35 25 25 25 20 20 20 15 15 15 10 10 10 8.5 5 5 5 0 0 0 0.0 20.0 40.0 60.0 80.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 Ambient Temperature Ta (C) Ambient Temperature Ta (C) Ambient Temperature Ta (C) to order to order please contact us on: t: +44 (0)1229 582 430 f: +44 (0)1229 585 155 e: sales marl.co.uk w: www.leds.co.uk marl international limited technical documentation has been designed by marl international limited for the intention of providing information, which must not be copied or released to a third party without prior written consent from marl international limited. the information provided does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. no responsibility can be assumed for inaccuracies or printing errors. marl BS EN ISO 9001:2008 approved manufacturer international limited reserve the right to alter without notice the specification or any conditions of supply for product or service. marl international limited - dsn 205 - version 2014-02-27-173158 page 2 of 5 Forward Current IF (mA) 5 Forward Current IF (mA) 5.7 Forward Current IF (mA)