514-105-76 Marl

PROFESSIONAL LED INDICATORS 12.7mm Mounting FEATURES l Robust bright nickel plated brass housing 514 SERIES PACK QUANTITY = 10 PIECES l Sealed to IP67 l Raised profile styling l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv 20mA (mcd) lp (nm) Topr Tstg STANDARD INTENSITY 514-105-21 Red Colour Diffused 12 19 100 627 -40 ~ +85 -40 ~ +85 Yes 514-111-21 Yellow Colour Diffused 12 20 50 590 -40 ~ +85 -40 ~ +85 Yes 514-114-21 Green Colour Diffused 12 20 60 565 -40 ~ +85 -40 ~ +85 Yes 514-105-23 Red Colour Diffused 24-28 20 100 627 -40 ~ +85 -40 ~ +85 Yes 514-111-23 Yellow Colour Diffused 24-28 20 50 590 -40 ~ +85 -40 ~ +85 Yes 514-114-23 Green Colour Diffused 24-28 20 60 565 -40 ~ +85 -40 ~ +85 Yes HIGH INTENSITY 514-102-04 Red Colour Diffused 1.9* 20 450 660 -40 ~ +85 -40 ~ +85 Yes 514-102-21 Red Colour Diffused 12 20 450 660 -40 ~ +85 -40 ~ +85 Yes 514-102-23 Red Colour Diffused 24-28 20 450 660 -40 ~ +85 -40 ~ +85 Yes UNITS Vdc mA mcd nm C C * = Voltage DC for 20mA product is Vf 20mA, not Vopr Fig 1 All LEDs Other voltages AC/DC available. Please contact our Technical Sales. = Products must be derated according to the derating information - Refer to Fig 1 How to Order: website: www.marl.co.uk email: sales marl.co.uk Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Page 1 of 2 MARL INTERNATIONAL LTD 2007 : DS 036/06 Issue 3 SAMPLES AVAILABLE514 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Brass to BS 2874 CZ121 Nickel plated to BS 1224 Nut Brass to BS 2874 CZ121 nickel plated to BS 1224 Panel Seal Viton Termination Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Lock Washer Zinc plated steel Dimensions in mm (Typical) 925-000-00 is brass tin plated. Not to scale For use with 514 series lamps. Encapsulation PC5430 resin TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS 514 1000 3* /1000 12.7 1.0 x,y=19.5 1.5-8.0 mw Vdc mm Nm mm mm * = Current version = Voltage version OPTIONAL FLYING LEAD TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm Customised 19/0.15mm 1.2mm lengths 19 DC Products Red-anode / Black-cathode 1000mm available 19 AC Products Brown-live / Blue-neutral 1000mm website: www.marl.co.uk email: sales marl.co.uk Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation BS EN ISO 9001:2000 relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply Approved Manufacturer for products or service. MARL INTERNATIONAL LTD 2007 : DS 036/06 Issue 3 Page 2 of 2